Re: Harddisks: Seek, Read, Write, Read, Write, Slow ?

From: Folkert Rienstra (see_reply-to_at_myweb.nl)
Date: 07/15/04


Date: Thu, 15 Jul 2004 19:02:49 +0200


"Ron Reaugh" <ron-reaugh@worldnet.att.net> wrote in message news:hjhJc.94738$OB3.83285@bgtnsc05-news.ops.worldnet.att.net
> "Nathan McNulty" <525676@betaweb.com> wrote in message
> news:OauKdFeaEHA.1048@tk2msftngp13.phx.gbl...
> > Actually, what is happening is that the heads on the platter need to
> > reconfigure themselves each time you read or write.
>
> Not really.

Yes, really. How much depends per cylinder. Not that it matters.

>
> > It is a hardware limitation.
>
> What limitation is that exactly?

You need to ask? Not that it matters.

>
> > By reading, the head can stay in the same location, but
> > once it is told to write, the head has to position itself to change the
> > magnetism of the sector of the platter it is on.
>
> That's false.

Nope. Not that it matters.

>
> > Then once you request to read again, the head has to move again.
>
> Not necessarily.

Indeed, as it's automatically done by the Servo system.



Relevant Pages

  • Re: Problem with a Maxtor Onetouch II 300GB
    ... LaCie external drives ... advanced data recovery techniques: ... IF the platter vibrates, the outer edges of the platter can actually ... The read head should be floating on a microscopic ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: [opensuse] hard drive pause when moving a laptop
    ... My thinking is that the disk head is "flying" just above the platter. ... Only accelerations characteristic of the end of a fall (dropping from 1G ... The slowest drives in use today spin at 3600 RPM with 5400 RPM being ...
    (SuSE)
  • Re: Advice Please Re: Hard Drive Speeds Relative to Partition Size
    ... moved from 250GB drives using two platters to the single platter models ... unit with one track buffer per head, the sdtr performance will vary over ... pagefiles per disk". ...
    (uk.comp.homebuilt)
  • Re: Striping data across platters in a single hard disk
    ... Actually, about 10 years or so back, Seagate used to make dual-active head ... The second problem is in significant loss of ... platter capacity - any defective track on one platter automatically meant that the good track on ...
    (comp.sys.ibm.pc.hardware.chips)
  • Re: Most impressive VAX installations
    ... drive had the disks vertically on a spindle, with 2 axis head movement - ... vertically to select the platter, then laterally to select the track. ... Probably 10 or 15 platters around 3 feet across iirc. ... gear scrap, much with a hammer through the face to stop it being reused. ...
    (comp.os.vms)