Re: D2007 sometimes on a go-slow

Well today it appears ok. But the original problem has restarted. I'm in the
middle of a large unit, do a Ctrl+Home followed by Alt+S and it takes about
15 seconds for the drop-down to appear. If I hop to another unit and Alt+S,
same thing. Alt+R also suffers the same way. The IDE is going off to do
something, but what?

I have now done the same trick as with D2006 in that I have removed
TGIDE100.bpl from the "Known IDE Packages" in the registry. Unfortunately
didn't fix it this time.

Graham


"Fernando Madruga" <Fernando.Madruga@xxxxxxxxx> wrote in message
news:461df4e0@xxxxxxxxxxxxxxxxxxxxxxxxx
Graham Powell wrote:
It would appear that I had a Package listed but there was no associated
.bpl file. Suddenly Delphi2007 started to report that it couldn't find
this file and so the problem has now been resolved by removing it from
the list.

So today everything is good. Still get the occasional blow out with
D2007. Certainly if you hold the keys down and use auto-repeat. Try
deleting a whole bunch of lines by holding down Ctrl+Y. Sometimes you are
lucky, sometimes booom!

Does it happen a lot to you? Just tried on a couple files for several
times and I was "lucky" all the time! :)
Are you using any 3rd party IDE enhancers? Particularly, any that is for
BDS2006 and not yet recompiled for D2007? (Yeah, I know, it *should* be
non-breaking...)


.

Relevant Pages

  • Re: Out of process AX-DLL (.exe) Help Needed
    ... I changed the name slightly within the IDE and compiled to the same old ... When I am calling the AX-EXE what name am I calling? ... Your original problem had to do with not maintaining binary compatibility. ... Tons of books out there, ...
    (microsoft.public.vb.general.discussion)
  • Re: [PATCH] alpha build fixes
    ... > ide.h is not shared between IDE and libata drivers ... I'm not sure what the original problem is with alpha, ... to provide the actual irq numbers in that case. ... It's in PCI because I figured it was as bad there than anywhere else. ...
    (Linux-Kernel)
  • Re: Raid1 array using a mobo K8T800 with a Via ....
    ... was lucky, ... chipset, two 200 Gig Seagate IDE ultra ATA Drives, and a 400 gig IDE ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: Receive/Send ports - Unable to add Inbound/Outbound Maps - RESOLVED
    ... For me restarting the IDE did the Trick. ... Was Lucky enough with that. ... able to resolve your issue, as i might have the same ...
    (microsoft.public.biztalk.general)
  • Re: Repair Windows XP Help
    ... You must have been very lucky. ... Instead of Help & Support opening all I got was my original problem of ... "Cannot display page". ...
    (microsoft.public.windowsxp.help_and_support)