Re: Predictive Dialer



Eivind Bakkestuen wrote:

> Are you looking for an in-house dialer (buying a hardware and software
> solution) or do you want to interface to a dialer rented out to you (run by
> another company in their location)? For the first option, I have a business
> contact. Feel free to email me at eivind (at) nexusdb (dot) com.

At this point, I believe I would want to be able to interface to a
dialer that would be purchased as an option by the end user. I am
planning to market my debt collections package some time in the future
and would like to offer an optional predictive dialing system. I am not
sure how many of the prospective buyers would need such a system as my
product would be aimed at smaller offices that might not have enough
collectors to justify a predictive dialer.

Mark J. Wallin, Ph.D.
.



Relevant Pages

  • ISDN Dailer Chap problem
    ... For some reason the Dialer interface ppp keeps getting refused due to ... a CHAP error. ... crypto map Genericmap2 1 ipsec-isakmp ...
    (comp.dcom.sys.cisco)
  • Object tracking - What am i doing wrong?
    ... I have been trying to get an ISDN circuit to dial up and connect 2x 1841 ... Cisco routers together if the primary adsl interface fails. ... encapsulation aal5mux ppp dialer ... access-list 101 permit ip 192.168.1.0 0.0.0.255 any ...
    (comp.dcom.sys.cisco)
  • Here is a tutorial on Cisco dialup
    ... outside" on the Dialer and/or Async interfaces ... Cisco Configs - Using AUX port and analog modem to dialup ISP ... Async Interface ...
    (comp.dcom.sys.cisco)
  • Re: Cisco 1841 with ISDN backup
    ... can you use a dynamic routing protocol over the VPN ... Configuring the Primary Interface for Static Routing ... The problem is, as you can see in my config, in both Dialer interfaces ...
    (comp.dcom.sys.cisco)
  • Re: PPPOE for DSL
    ... with an ethernet interface and ppoe. ... ip nat outside ... configuration for Spoke1 router using PPPOE ... !-enable vpdn to allow creation of dialer interface to support pppoe ...
    (comp.dcom.sys.cisco)