16F876 pulls

From: PDRUNEN (pdrunen_at_aol.com)
Date: 01/20/04 

Date: 20 Jan 2004 04:05:39 GMT

Hi Group,

I have a few dozen 16F876 20Mhz 28 pin dip flash microcontroller. These are
removed from products that are returned from the field. the chips are in
sockets so there is no desoldering. I can return the chip to the blank
condition and verify it.

If you are interesting in a few, let me know. I would like to sell out like
min order of 10 at 2.5 each

Thanks

Relevant Pages

  • Re: Is it normal for 2 proms to be or look identical?
    ... Was getting rid of all the old sockets, but when I went to put them ... I'm talking about proms 2 & 3. ... I know game roms have the stickers on them to identify them, ... 30 yr old chips. ...
    (rec.games.pinball)
  • Re: Atari 1040ST screen flicker when lo
    ... It seems after it warms up the flicker goes away! ... describe the problem and the solution (text taken from Chips 'n Chips): ... Videoshifter gegen Masse gel?tet. ... the chips are likely to slowly creep out of their sockets. ...
    (comp.sys.atari.st)
  • Re: Hints/feedback on disk reading failure on Apple IIe
    ... I found some IIgs memory expansion cards - do you happen to ... know if the dram chips on these cards are the same 64kbit type as used on ... chips up and down in their sockets. ...
    (comp.sys.apple2)
  • Re: Is it normal for 2 proms to be or look identical?
    ... Was getting rid of all the old sockets, but when I went to put them ... I'm talking about proms 2 & 3. ... I know game roms have the stickers on them to identify them, ... 30 yr old chips. ...
    (rec.games.pinball)
  • my epson Intellidge Extermination program
    ... In 2002 I reverse engineered the Intellidge protocol and published the details. ... Even though I defeated the chips I still had trouble with the sockets and corrosion on the head PCB where the sockets connect. ...
    (comp.periphs.printers)