a little board that runs linux?

From: Andrea Fino (af_at_faino.org)
Date: 04/01/04 

Date: Thu, 01 Apr 2004 11:32:16 +0200

Hi,
I need to find a little cpu board that runs linux.
What I need:
serial interface
ethernet 10 at least.

32MB/64 of ram 16 of flash.

Do you know some manufacter that sells such a thing, in little/medium
quantity? (1,10,30)

Thanks,
Andrea

Relevant Pages

  • Re: Launching Image from Flash (PXA270)
    ... You should also update your bootloader so that it would jump to your flash ... base address instead of trying loading the image from ethernet. ... Yannick Chamming's ... 83100000 00F00000 RAM ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Launching Image from Flash (PXA270)
    ... You can either have your nk.bin file get copied as is in flash, ... expanded in RAM by bootloader, and have it executed in RAM. ... ethernet to RAM, except that you would take datas from flash instead of ... And then if bootloader jumps to flash base address where OS ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Performance and Flash Pipelining on TI 28F12 DSPs
    ... > of "critical code" we could move to RAM. ... > from internal flash? ... Since the external RAM is as big as the internal flash, ... the timers and all other interrupts are shut off, ...
    (comp.dsp)
  • Re: [ANNOUNCE] Ramback: faster than a speeding bullet
    ... The fact is, enterprise scale ramdisks are here now, while ... enterprise scale flash is not. ... does not approach the write performance of RAM, ... My goal is not to replace RAM with flash, but disk with flash. ...
    (Linux-Kernel)
  • XIP vs RAM
    ... Maybe the system can even get away with the next small size RAM ... Does anyone know if/what the premimum of the "K" Strata FLASH is? ... Also what are the steps needed to transition to a XIP OS? ... >>> My bootloader create a BINFS partition and an EXTENDED partition on ...
    (microsoft.public.windowsce.platbuilder)