Re: ATmega128L programming problem

From: Martial Chateauvieux (Martial.Chateauvieux_at_siemens.com)
Date: 06/24/04 

Date: Thu, 24 Jun 2004 10:45:49 +0200

Did you notice that the Programming doesn't use MOSI/MISO but some PDI
PDO pins ?

Martial

Daniel Hanczewski wrote:
> Dear all,
>
> This is my first time to use ATmeg128L (3.3V version) and I'm having
> problem with programming it via SPI. I'm using STK200 with HC244 on
> board so theoreticaly this should work. But it is not. The programmer
> STK200 works fine with ATmega128 (5V version) either with PonyProg or
> WinAVR. I have also made STK200 with LCV244 but it also did not help.
>
> Has anyone had a problem like mine?
>
> Best regards
> Daniel
>