CAN bus wiring question.

From: Stephen (spmok2_at_canada.com)
Date: 07/08/04 

Date: 8 Jul 2004 13:01:24 -0700

I have a PCI computer card that has the following pinouts for CAN
communications.

CAN_L
CAN_H
SHIELD
V+
V-

Its a modicon type connector. I know what the CAN_L and CAN_H is for,
however I have no clue where to hook the other three SHIELD, V+, V- to
on my circuit.

I was told the V+, V- is for external power, but I disabled it through
a jumper. However I am wondering if I have to tie it to something.
If so what would it be? Any idea?

PS: The card is a National Instruments PCI-CAN card (from 1997)

Relevant Pages

  • Using Legacy ISA data acquisition card on Win2K
    ... I have a legacy data acquisition card that used a dll and dual ported ... to block off the memory used by the ISA card for communications. ... when I install Win2K). ...
    (microsoft.public.win2000.general)
  • Re: Using Legacy ISA data acquisition card on Win2K
    ... Is there an option in the system bios for blocking off this memory? ... THe problem is the card ... > to block off the memory used by the ISA card for communications. ... > when I install Win2K). ...
    (microsoft.public.win2000.general)
  • Re: Local (loopback) sniffing
    ... > capture local communications in Solaris. ... > communications done within the host - is there no way to do that on ... > Solaris without adding a card, removing lo and all sorts of highly ...
    (comp.unix.solaris)
  • Re: AE Piggyback RGB Card Pinouts
    ... It's the RGB card, so it has Apple digital output, but the pinouts on ...
    (comp.sys.apple2)
  • Re: Dual head graphics card for HP 5100 MT?? Help!!
    ... I have a PCI-Express card which is dual head and it does not ... Anyway, the two slots looks kind of like this, as far as pinouts: ... - by anonymous Mother in Austin, ...
    (comp.sys.hp.hardware)