TI OMAP MMU help

From: mpeckham (res00fr1_at_gte.net)
Date: 11/13/04 

Date: Sat, 13 Nov 2004 20:02:33 GMT

I am trying to set up the MMU on the ARM side of the OMAP5910 and I am
running into difficulty understanding the TI and the ARM documentation
for setting this up. I have programmed the DSP MMU through the ARM
and it is rather straight forward. The ARM MMU is confusing for me.

I want to use the MMU to "write protect" my FLASH memory. I seem to
have an uninitialized pointer writing into the flash memory space and
my flash goes into its command state. I'm not actually programming
the flash since I have disabled flash programming but the flash still
accepts and handles commands.

Is there some sample code around to help me program the ARM MMU?

TIA

Marty

Relevant Pages

  • Re: Wich 16-bit MCU?
    ... Actually I don't care much if flash is on-chip or in a separate chip. ... MCF52223 seems to have a thing called "EzPort" for programming. ... Often it is a jtag connection, while ColdFires use Freescale's BDM connector. ... However, you still want to get a BDM (or jtag, if you pick an ARM) adaptor and use it for much more flexible debugging rather than just downloading and testing. ...
    (comp.arch.embedded)
  • Re: general questions regarding ARMs
    ... > Hi - I'm fairly certain I'm going to use an ARM in a project I'm ... programming: My understanding of programming an ARM is that you do ... > line of code in the flash - the reset interrupt. ... DMA: the chip I'm using boasts about its Peripheral DMA Controller ...
    (comp.arch.embedded)
  • Re: general questions regarding ARMs
    ... this is not ARM specific but more vendor specific and most ... > software (e.g. Greenhills and ARM). ... > download your code into the flash. ... > This depends on tyhe memory implementation. ...
    (comp.arch.embedded)
  • Re: AVR or PIC for a beginner
    ... Otherwise, I prefer ARM M3 ... except for very low power and code density with AVR. ... The SAM7 parts are about 0.5 mA/MHz even while running at full ... if one processor uses 40% more Flash space. ...
    (comp.arch.embedded)
  • Re: ARM 7 - your comments please!
    ... I have gained significant experience with the ST ARM parts (710,711, ... Although I am an Atmel fan in others product lines many of the Atmel ... Are there any ARM7 with more than 64KB Ram and 1MB Flash? ...
    (comp.sys.arm)