FTDI driver installation problems



I found a similar problem in an earlier thread, but not really a
solution...

I am trying to install the FTDI FT232BM VCP driver on a Windows 98 system.
The system won't "pick up" the driver. It recognizes the USB device
(unknown) when I plug it in. It then insists on automatically attaching
its own USB driver. I can tell it to "update driver" and point it to the
directory where the FTDI driver is located. However, it insists that it
knows better (the best driver is already installed) and won't update.

I've tried removing the "unknown device" and doing it over, no change...

Any ideas? [FWIW, I am currently using the FTDI FT232BM without an
EEPROM.]

tnx, jmk
.



Relevant Pages

  • Re: For exact data transfer by using FT2232H .
    ... I do not work for FTDI. ... I have directly and indirectly worked with FTDI devices and with USB ... TRIAL the DRIVER in various configurations on MULTIPLE ... One customer had to do continuous checks on FIFO data streams to ...
    (comp.arch.embedded)
  • Re: Critique please
    ... drivers work, but only if you install them by using "update driver" and even then, the order seemed significant. ... I have not looked for a later driver set. ... The reply address is a spam trap. ...
    (uk.comp.homebuilt)
  • Re: FTDI UM245R FIFO-USB interface
    ... FTDI's own library and like you I could interact with the chip's fifo ... Turns out that the FTDI driver ... when you open a serial device in Windows, you have the option of bumping up the cache size (buffer) for the incoming data. ...
    (sci.electronics.design)
  • Re: Prolific PL2303 - possible to tap some power?
    ... -- Datasheet readily available, no having to call up and possibly sign an NDA (OK, FTDI does make you sign an NDA if you want a detailed description of the EEPROM configuration, but I've used a lot of FTDI chips and so far never needed it -- I expect that you only do if you're having to write your own device driver for the part) ... I already ordered some amazingly cheap stuff from Hong Kong through ...
    (sci.electronics.design)
  • Re: about Maxim MAX3421E
    ... you might take a look at FTDI's assortment of USB interface chips: ... Frank McKenney, McKenney Associates ... flaw in their driver (The driver returned bogus data without setting ... I've designed FTDI out of every design, and I'm much happier for it. ...
    (comp.arch.embedded)