how to generate time delay

What is the best way to generate a time delay in a waveform.

(I understand how I could use a monostable one-shot to create a pulse.
Then I suppose letting another signal trigger off the trailing edge of
this pulse. But I cannot find a gate that triggers off the trailing
edge.)

Thanks in advance,
JD

.

Relevant Pages

  • Re: how to generate time delay
    ... >(I understand how I could use a monostable one-shot to create a pulse. ... >Then I suppose letting another signal trigger off the trailing edge of ...
    (comp.arch.embedded)
  • Re: Fwd: Re: NetBSD GPS/PPS using 4.2.6p3
    ... intervening hardware to stretch the pulse width to something the PC ... The capture / assert configuration options does ... not select reading the leading or trailing edge of a PPS pulse, ... PGP KeyID = 0x5F22FDC1 ...
    (comp.protocols.time.ntp)
  • Re: Fwd: Re: NetBSD GPS/PPS using 4.2.6p3
    ... intervening hardware to stretch the pulse width to something the PC ... not select reading the leading or trailing edge of a PPS pulse, ... the pulse stretcher and/or inverter just after the GPS receiver and see what happens. ...
    (comp.protocols.time.ntp)
  • Re: pulse delay circuit
    ... I'm in need of a simple delay circuit for the positive edge of a pulse ... Do you want the delayed pulse's trailing edge to fall when the input ... Professional Circuit Designer ...
    (sci.electronics.design)
  • Re: PLL input filter vs. loop filter
    ... Pulse width, yes, synchronized with the VCO. ... The trailing edge is phase. ... Tom ...
    (sci.electronics.design)