C Compiler Recommendation for ATMEL 8051 USB Development.

Relevant Pages

• Re: Selection of a USB microcontroller
  ... There are several uCs with USB, but how to select the best one? ... A requirement is ease of programming, not only for the microcontroller but ... The microcontroller should be around 5 to 20 MIPS with at least 8KB Flash, ... there are ARM devices with USB and the new Atmel ...
  (comp.arch.embedded)
• Re: C Compiler Recommendation for ATMEL 8051 USB Development.
  ... > I am considering using an Atmel 8051 based microcontroller for a USB ... I really like Keil. ...
  (comp.arch.embedded)
• Re: Req: (Free) Embedded Platforms for Education
  ... partner with some 'discounts' on licences. ... Advanced Microcontroller Systems on a Programmable Chip: ... Use PIC18f1220 or 18F4550(has USB possibility) instead - or at least ... "...The ARM design was started in 1983 as a development project at Acorn Computers Ltd. ...
  (comp.arch.embedded)
• Re: Adding USB Interface to Low-Cost 8-Bit Microcontroller
  ... The re-FLASHing would be facilitated by code we write that runs in the microcontroller and reprograms a portion of the FLASH. ... We have a handle on digital signatures and what would be required to prevent a customer from "forging" a software load. ... However, what is required to implement a USB interface in the product (for an 8-bit microcontroller), and what is required as far as a driver on the PC side? ...
  (comp.arch.embedded)
• Re: Adding USB Interface to Low-Cost 8-Bit Microcontroller
  ... These have the standard 8-bit whistles, like SPI, ... in the microcontroller and reprograms a portion of the FLASH. ... what is required to implement a USB interface in the product (for ... If you do not mind the customers getting their own cable, ...
  (comp.arch.embedded)