Connect two USB slave

Hi all,

AFAIK, connecting two USB slave requires 3 chips:
Controller chip + USB host chip + USB hub chip.

But the 3 chips consume a lot of areas.
Can you recommand any chip includes these 3 chips or 2 of the chips?

Best regards,
Davy

.

Relevant Pages

  • Re: USB latch-up problem revisited/Attn. Paul
    ... > want to buy a USB hub to overcome the problem of all the USB ports being ... NEC USB chips seem to have a good reputation. ... and see the chip in the picture. ... (Microsoft developed their USB 2.0 drivers, using NEC chips. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Memory
    ... As revealed by the annotations at ... kind of USB board to acquire that capability on this old machine. ... 32 MByte and 16 chips ...
    (comp.sys.ibm.pc.hardware.misc)
  • Re: Hacking into "Thumb" MP3 players
    ... >For the few dollars they cost, you get an awful lot of clever ... >electronics in those little thumb USB MP3 players.. ... >unidentifiable chips)? ...
    (sci.electronics.design)
  • Re: CPUs von STMicroelectronics
    ... Die teureren Chips, z.B. für 10 Euro Einzeilpreis, haben nicht nur 12 Bit ... Hat schon einer Erfahrung mit STMicroelectronics Microcontroller gemacht? ... Ein Projekt ist abgeschlossen und läuft, allerdings in kleinen Stückzahlen, sein März dieses Jahres ohne besondere Vorkommnisse. ... Die Software von ST (FWLibrary und USB) funktioniert gut. ...
    (de.sci.electronics)
  • Re: Talk to computers?
    ... You can use USB as well, but the PICs I tend to use don't have ... any native USB support so I would have to get a serial/USB adapter ... If you want to look at PIC chips, check out www.picbook.com for a nice ... program instead of needing to buy a seperate programmer board to flash ...
    (sci.electronics.design)