Re: Problems with HCS12

I don't know if d-bug4 is like d-bug12, but you can't write to flash
with d-bug12 unless you use the pod mode (one device controlling the
other in BDM mode), or you can overwrite the monitor using the
bootloader (not recommended for a newbie).

This board is not one I'm familiar with, but you can check the "intro"
link at my web site:
http://www.ericengler.com/AsmIDE.aspx

.

Relevant Pages

  • Learning about uCs (ARM7)
    ... The board has a flash loader software on CD and also a bootloader (w/o ... The board has a 20 pin JTAG ... Monitor or Redboot port for this board. ...
    (comp.arch.embedded)
  • Re: Learning about uCs (ARM7)
    ... > any Monitor, the bootloader is simple). ... The board has a 20 pin JTAG ... > Monitor or Redboot port for this board. ...
    (comp.arch.embedded)
  • Re: DVI monitor capable of a 100Hz Refresh Rate
    ... a TFT monitor that supports DVI and a refresh rate of 100Hz. ... It has a maximum refresh rate of 100Hz and supports a maximum ... P.S. Learn how to quote what you're responding to, newbie. ...
    (comp.sys.ibm.pc.hardware.video)
  • Re: Tech: Problems with Rampage Picture
    ... you saying that the Synch plug needs rewiring from the old monitor to ... I'm such a newbie at this I'm not even sure what check synch ... bought a new monitor from Happ Controls for it thinking that would fix ...
    (rec.games.video.arcade.collecting)
  • intalling a monitor
    ... Although I'm not quite a newbie but I'm having a hard ... time with a 19" monitor I inherited. ... image fit the screen which was semi succesful, ... inadvertantly shrunk everything else,icons, email, fonts ...
    (microsoft.public.windowsxp.network_web)