Re: how to initialize the CAN in the network

On Tue, 10 Jan 2006 11:09:11 -0600, Dave Hansen wrote:

> Bosch had an excellent paper describing bit
> timings somwhere out there on the web. J1939 is 250 kHz, but that
> doesn't tell you all you need to know about bit timing.

There's

http://www.semiconductors.bosch.de/pdf/CiA99Paper.pdf

which I think is the one you are referring to. The CAN 2.0 spec is at

http://www.algonet.se/~staffann/developer/can2spec.pdf


~Dave~
.