Re: AT91RM9200 USB Mass Storage Device BULK Design
- From: "Ulf Samuelsson" <ulf@xxxxxxxxxxxxx>
- Date: Fri, 28 Apr 2006 13:04:40 +0200
"oklm" <oklm803@xxxxxxx> skrev i meddelandet
news:Ae2dnScmi4GMgs3ZRVn-pw@xxxxxxxxxxxxxxx
Hi,Members!
I am looking for source code that will allow an embedded device to look
like an USB mass storage device when inserted into a host PC. The embedded
device has an ARM core, the CPU in particular is an Atmel AT91RM9200, and
will be using embedded Linux as its OS.
Anyone give me some advices about how can i modify the example
AT91RM9200-BasicUSB(CDC class) to Mass Storage Device class or provide
this source code!?
I think Linux 2.6.xx already has USB Mass Storage Code inside.
You just have to make sure that you add this configuration when you "make
xconfig"
If you are looking to run USB Mass Storage in U-Boot, then it is probably
better to get the USB Mass Storage Code from www.at91.com.
This is ported tot he SAM7, but the USB block is more or less the same.
I have heard some people never got the code, so you may also want to contact
a local Atmel representative.
Thanks!
Best Regards
contact: oklm803@xxxxxxxxx
--
Best Regards,
Ulf Samuelsson
This is intended to be my personal opinion which may,
or may bot be shared by my employer Atmel Nordic AB
.
- Follow-Ups:
- Re: AT91RM9200 USB Mass Storage Device BULK Design
- From: linnix
- Re: AT91RM9200 USB Mass Storage Device BULK Design
- References:
- Prev by Date: Re: Two Ethernet MACs in a new DualCore ARM Microcontroller
- Next by Date: Re: TFT Controller + Ethernet
- Previous by thread: Re: AT91RM9200 USB Mass Storage Device BULK Design
- Next by thread: Re: AT91RM9200 USB Mass Storage Device BULK Design
- Index(es):
Relevant Pages
|