Re: Best approach, LCD on ARM7

From: "Mike Noone" <nleahcim@xxxxxxxxx>
Date: 14 Jul 2006 22:36:29 -0700

Henrik @ work wrote:

Hello group,

For a new project, we have almost decided on AT91SAM7X256 for a variety of
reasons. Primarily due to its rich peripheral set and previuos knowledge of
Atmel Chips.

But we need to implement a LCD display, preferably 320x240 pixels into our
system and we would like some advice on the best way to do this. With
respect to both hardware and software development. I.e how to get a grip on
this. would we use LCD controller or do direct IO from the processor?

Any help, comments, links are gladly appreciated.

Thanking you in advance.

Henrik

Hi Henrik - Olimex is coming out with a SAM7X256 dev board within a
couple weeks that has an LCD display on it. You may want to check that
out: http://olimex.com/dev/sam7-ex256.html

-Mike

.

References:
- Best approach, LCD on ARM7
  - From: Henrik @ work

Prev by Date: Re: AT91SAM7S-EK serial ports
Next by Date: Odd Walkman tuner problem!
Previous by thread: Re: Best approach, LCD on ARM7
Next by thread: (SPI equipped) Sensor Data to PC
Index(es):
- Date
- Thread

Relevant Pages

Best approach, LCD on ARM7
... Primarily due to its rich peripheral set and previuos knowledge of ... Atmel Chips. ... But we need to implement a LCD display, ...
(comp.arch.embedded)
Re: RaidTec FlexArray RAID configuration
... simple operations which can also be done using the LCD display. ... it's just that arranging for this test in this particular case requires some time (for reasons I'll not detail here) and I'm currently on a very tight schedule for other jobs. ...
(comp.sys.ibm.pc.hardware.storage)