Re: LPC2129 died, but why ?

On Tue, 26 Sep 2006 22:22:21 +0200, Mad I.D. wrote:
/cut

Thank you Robert and Bob.

When I try to access the chip via Philips flash utility I get "Can't read
device, device error etc.

When I try to access the chip via JTAG I can't erase or download the flash
in it by I CAN DEBUG CODE ALREADY IN. I get "prefech abort" after around
100 instruction. (CPU fetches instruction which can't execute).

So if I can't erase the flash either way it's dead althrough CPU is
operating :-(


Ivan
.

Relevant Pages

  • Re: LPC2129 died, but why ?
    ... device, device error etc. ... When I try to access the chip via JTAG I can't erase or download the flash ...
    (comp.arch.embedded)
  • Re: Squawk and Talk easy question
    ... I am trying to troubleshoot the squawk and talk sound ... with this sound board, and I'm not sure about the intial flash, and ... Fakers Guide: No first flash means a bad U6, ... The U1 chip now tests the first PIA U7. ...
    (rec.games.pinball)
  • Re: Recovering Data from Flash Disk
    ... Take a soldering iorn and unsolder the flash on both units, ... flash chip you want to recover onto the new flash drive's board. ... I hope it is only the controller chip that is ... burnt, and not the flash chip itself. ...
    (sci.electronics.repair)
  • Strange BIOS behavior
    ... to 1.08 was necessary before I could flash to 1.16. ... The first flash ... that bios chip was dead. ... to reprogram the chip I stumbled on a method that seemed a good one. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Question about strange flash problem
    ... I'm seeing a strange bug with a flash chip. ... It's an FPGA based system with flash and SRAM sharing the bus. ... way of programming are the in-system CFI routines. ...
    (comp.arch.embedded)