Re: MSP430F2001 programming



my options if I want to continue to use mspgcc tool suite:
a) can MSP-FET430 drive the 2 lines required by SpyByWire?The parallel port FET is basically just a dumb buffer, so yes - it
could support SBW. However, nobody has written the necessary bit-
banging to get it working, as far as I'm aware.

Yes, I know what the ppFET is noing.
I've read slaa149b.pdf from TI web site and I would say basic SPW is
open; I was expecting to see it in the latest msp430-jtag from mpsgcc
tools but it is not there [yet]. If anyone is working on this please
let me know, I could help.

If there are still problems with ez430/Linux [?] I don't understand
why the parallel port is not used, since at least this protocol is
open (I don't know if what you have to send on pseudo serial port of
ez430 is open spec).

--
mmihai

.

Relevant Pages

  • Re: DAC software
    ... Bit banging into the serial DAC from the parallel port is very simple also. ... solution using the dos found on the windows boot disk. ...
    (sci.electronics.design)
  • Re: Transistor to drive solenoid & trigger voltage
    ... George Herold wrote: ... what about if you run a DOS shell? ... Bit banging of the parallel port could be done in any version of Windows up to XP. ...
    (sci.electronics.design)
  • Re: How to intract with external hardware
    ... parallel port using c programming under linux. ... Take a look at parallel port i2c bit banging in linux-kernel for ...
    (comp.os.linux.hardware)
  • Re: MSP430F2001 programming
    ... can MSP-FET430 drive the 2 lines required by SpyByWire?The parallel port FET is basically just a dumb buffer, ... banging to get it working, ... TI should supply free XP laptops for developments. ...
    (comp.arch.embedded)
  • Re: MSP430F2001 programming
    ... The parallel port FET is basically just a dumb buffer, ... could support SBW. ...
    (comp.arch.embedded)