Re: Serial communication of ATMega128
- From: Rene Tschaggelar <none@xxxxxxxx>
- Date: Wed, 31 Jan 2007 12:36:52 +0100
sindhu wrote:
Hi all,[snip]
Iam working on Atmega128 and STK500.Iam new to this.
I need to transmit a character from controller.I have given the code
below.
}
This code is working.PORTA outputs 41.Hyperterminal is not showing
character A.
Can anyone point out the mistake?
I remmber having had a problem with the serial port
and the Mega128 once. The SPI port for programming
is on top of the Serial_0. Some external gates are
necessary to resolve this conflict.
Rene
--
Ing.Buero R.Tschaggelar - http://www.ibrtses.com
& commercial newsgroups - http://www.talkto.net
.
- Follow-Ups:
- Re: Serial communication of ATMega128
- From: Dave Hansen
- Re: Serial communication of ATMega128
- References:
- Serial communication of ATMega128
- From: sindhu
- Serial communication of ATMega128
- Prev by Date: Re: RSA on 8bit micro
- Next by Date: Re: Notebooks that still have legacy ports
- Previous by thread: Re: Serial communication of ATMega128
- Next by thread: Re: Serial communication of ATMega128
- Index(es):
Relevant Pages
|
