comp.arch.embedded

• Thread Index

---

• Re: PIC BASIC grammar
  • From: Don McKenzie
• Re: Best processors for trig?
  • From: Ulf Samuelsson
• Re: Video capture/compression
  • From: Ulf Samuelsson
• Re: How does DO-178 treat OEM modules (with software)?
  • From: steve
• Re: where is the FAQ for this group please
  • From: msg
• Re: Useless whinging about rude/clueless requests for help...
  • From: Everett M. Greene
• Re: converting float to ascii w/o printf
  • From: Everett M. Greene
• Re: Best processors for trig?
  • From: Everett M. Greene
• Re: Best processors for trig?
  • From: Stefan Reuther
• Re: where is the FAQ for this group please
  • From: JeffM
• Re: shame on MISRA
  • From: msg
• Re: Best processors for trig?
  • From: Paul Keinanen
• Re: shame on MISRA
  • From: msg
• Re: shame on MISRA
  • From: msg
• Re: Best processors for trig?
  • From: Paul Keinanen
• Re: Best processors for trig?
  • From: Grant Edwards
• Re: Best processors for trig?
  • From: Warren Block
• Re: Best processors for trig?
  • From: Tauno Voipio
• Re: Video capture/compression
  • From: Paul Carpenter
• Re: shame on MISRA
  • From: Hans-Bernhard Bröker
• Re: Nvram write modes and problems
  • From: Hans-Bernhard Bröker
• Re: Best processors for trig?
  • From: Mike Noone
• Re: Best processors for trig?
  • From: Mike Noone
• Re: Best processors for trig?
  • From: Mike Noone
• Re: Video capture/compression
  • From: Ulf Samuelsson
• Re: Video capture/compression
  • From: Paul Carpenter
• Re: shame on MISRA
  • From: Hans-Bernhard Bröker
• Re: where is the FAQ for this group please
  • From: Anon
• Nuclues Net Buffer
  • From: vikramuv
• Re: Who is working with the SAM9263?
  • From: rickman
• Re: Video capture/compression
  • From: Meindert Sprang
• PIC BASIC grammar
  • From: Account1
• Re: Best processors for trig?
  • From: Paul E. Bennett
• Re: where is the FAQ for this group please
  • From: Chris Hills
• Re: shame on MISRA
  • From: Chris Hills
• Re: Useless whinging about rude/clueless requests for help...
  • From: Phillip
• Re: Walk In Interview in HCL Technolgies Bangalore on 31st March & 1st April 2007
  • From: Viral
• Re: Serializer/Deserializer with fibre connection, recommendations
  • From: Dave
• Re: Who is working with the SAM9263?
  • From: Jim Granville
• Re: shame on MISRA
  • From: Ulf Samuelsson
• Re: Who is working with the SAM9263?
  • From: Ulf Samuelsson
• Re: where is the FAQ for this group please
  • From: AZ Nomad
• Re: Nvram write modes and problems
  • From: Robert Adsett
• Re: Best processors for trig?
  • From: Paul Keinanen
• Re: where is the FAQ for this group please
  • From: CBFalconer
• Re: shame on MISRA
  • From: Robert Adsett
• Re: shame on MISRA
  • From: CBFalconer
• Re: Walk In Interview in HCL Technolgies Bangalore on 31st March & 1st April 2007
  • From: TheDoc
• Re: Best processors for trig?
  • From: Paul Keinanen
• Re: Who is working with the SAM9263?
  • From: rickman
• Re: shame on MISRA
  • From: Robert Adsett
• Re: Who is working with the SAM9263?
  • From: Jim Granville
• Re: Who is working with the SAM9263?
  • From: Ulf Samuelsson
• Re: How does DO-178 treat OEM modules (with software)?
  • From: Leif Holmgren
• Re: Who is working with the SAM9263?
  • From: Jim Granville
• Re: Best processors for trig?
  • From: Wilco Dijkstra
• Re: Best processors for trig?
  • From: Eric
• Re: Best processors for trig?
  • From: Roberto Waltman
• Re: Who is working with the SAM9263?
  • From: Ulf Samuelsson
• Re: Best processors for trig?
  • From: CBFalconer
• Re: Best processors for trig?
  • From: Tim Wescott
• Re: Who is working with the SAM9263?
  • From: rickman
• Re: Useless whinging about rude/clueless requests for help...
  • From: rickman
• Re: Video capture/compression
  • From: Ulf Samuelsson
• Re: Who is working with the SAM9263?
  • From: Ulf Samuelsson
• Re: Best processors for trig?
  • From: Tauno Voipio
• Re: converting float to ascii w/o printf
  • From: Paul Keinanen
• Re: Best processors for trig?
  • From: Ulf Samuelsson
• Re: where is the FAQ for this group please
  • From: JeffM
• Re: Best processors for trig?
  • From: larwe
• Re: Useless whinging about rude/clueless requests for help...
  • From: Pete Fenelon
• Re: Car computer
  • From: Pete Bergstrom
• Re: Useless whinging about rude/clueless requests for help...
  • From: Tim Wescott
• Re: Best processors for trig?
  • From: Tim Wescott
• Re: converting float to ascii w/o printf
  • From: Everett M. Greene
• Re: Best processors for trig?
  • From: 4MLA1FN
• Re: converting float to ascii w/o printf
  • From: ChrisQuayle
• Re: Best processors for trig?
  • From: Tauno Voipio
• Re: Gcc for AVR
  • From: marco belli
• Best processors for trig?
  • From: Mike Noone
• Re: Gcc for AVR
  • From: Arlet
• Re: Is this ARM possible?
  • From: Robert . NXP
• Gcc for AVR
  • From: marco belli
• Re: shame on MISRA
  • From: Dave Hansen
• Re: Useless whinging about rude/clueless requests for help...
  • From: Chris Hills
• iTechArt Group - Custom Software Development and Offshore outsourcing Company
  • From: VB
• Re: Common software architecture for embedded systems
  • From: Tobias Rischer
• Re: Useless whinging about rude/clueless requests for help...
  • From: Tim Wescott
• Re: FATxx on a Compact Flash
  • From: Tim Wescott
• Re: where is the FAQ for this group please
  • From: Not Really Me
• Re: FATxx on a Compact Flash
  • From: Not Really Me
• Re: How does DO-178 treat OEM modules (with software)?
  • From: Not Really Me
• EDP 2007 (Multi-core, Power, and DFM Focus) -- Early Registration Ends 03/31/07
  • From: b_kapoor
• Re: converting float to ascii w/o printf
  • From: Not Really Me
• Re: Video capture/compression
  • From: 4MLA1FN
• Re: Useless whinging about rude/clueless requests for help...
  • From: Roberto Waltman
• Re: where is the FAQ for this group please
  • From: Chris Hills
• Re: Is this ARM possible?
  • From: Markus Zingg
• Re: MSP-FET430UIF, IAR Kickstart:
  • From: PeterJ
• Re: shame on MISRA
  • From: Vladimir Vassilevsky
• Re: Who is working with the SAM9263?
  • From: rickman
• Video capture/compression
  • From: Meindert Sprang
• Re: Walk In Interview in HCL Technolgies Bangalore on 31st March& 1st April 2007
  • From: CBFalconer
• Re: NanoLOC
  • From: CBFalconer
• Re: Common software architecture for embedded systems
  • From: CBFalconer
• Re: Making a HOBO Spill It's Guts to Non-Proprietary Software ?
  • From: Robbo
• Re: why use assembly in mmu initialization?
  • From: yunyuaner@xxxxxxxxx
• Re: shame on MISRA
  • From: Boudewijn Dijkstra
• Re: Common software architecture for embedded systems
  • From: Boudewijn Dijkstra
• Re: shame on MISRA
  • From: Arlet
• Re: shame on MISRA
  • From: Tom Lucas
• Re: why use assembly in mmu initialization?
  • From: Chris Hills
• Re: Is this ARM possible?
  • From: Chris Hills
• Re: why use assembly in mmu initialization?
  • From: ChrisQuayle
• where is the FAQ for this group please
  • From: Anon
• Re: Useless whinging about rude/clueless requests for help...
  • From: Tom Lucas
• Re: Walk In Interview in HCL Technolgies Bangalore on 31st March & 1st April 2007
  • From: ChrisQuayle
• Re: Is this ARM possible?
  • From: Tom Lucas
• Re: Nvram write modes and problems
  • From: Stef
• Re: shame on MISRA
  • From: msg
• Re: a question in 8051 microcontroller
  • From: gary drummond
• Re: shame on MISRA
  • From: Chris Hills
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Chris Hills
• Re: FATxx on a Compact Flash
  • From: msg
• Re: NanoLOC
  • From: Chris
• Re: Who is working with the SAM9263?
  • From: Ulf Samuelsson
• Re: shame on MISRA
  • From: Ulf Samuelsson
• FATxx on a Compact Flash
  • From: Tim Wescott
• Re: why use assembly in mmu initialization?
  • From: Arlet
• Re: Common software architecture for embedded systems
  • From: Baron Samedi
• Re: Common software architecture for embedded systems
  • From: Baron Samedi
• Re: Common software architecture for embedded systems
  • From: Baron Samedi
• Re: shame on MISRA
  • From: msg
• Re: shame on MISRA
  • From: CBFalconer
• why use assembly in mmu initialization?
  • From: yunyuaner@xxxxxxxxx
• Re: Useless whinging about rude/clueless requests for help...
  • From: John Perry
• Re: Nvram write modes and problems
  • From: Robert Adsett
• Re: Useless whinging about rude/clueless requests for help...
  • From: Grant Edwards
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: CBFalconer
• Re: Useless whinging about rude/clueless requests for help...
  • From: Mark McDougall
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Joerg
• Re: MSP-FET430UIF, IAR Kickstart:
  • From: CBFalconer
• Re: Walk In Interview in HCL Technolgies Bangalore on 31st March & 1st April 2007
  • From: CBFalconer
• Re: Useless whinging about rude/clueless requests for help...
  • From: CBFalconer
• Re: Useless whinging about rude/clueless requests for help...
  • From: CBFalconer
• Re: shame on MISRA
  • From: CBFalconer
• Re: MSP-FET430UIF, IAR Kickstart:
  • From: Joerg
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Joerg
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Joerg
• Re: Chipcon/8051 sanity check
  • From: Jim Granville
• Re: shame on MISRA
  • From: ChrisQuayle
• Re: MSP-FET430UIF, IAR Kickstart:
  • From: PeterJ
• Re: Chipcon/8051 sanity check
  • From: FreeRTOS.org
• Re: Who is working with the SAM9263?
  • From: Jim Granville
• Good headhunters
  • From: BubbaGump
• Re: Chipcon/8051 sanity check
  • From: Jim Granville
• Re: Useless whinging about rude/clueless requests for help...
  • From: Ulf Samuelsson
• Re: Useless whinging about rude/clueless requests for help...
  • From: FreeRTOS.org
• Re: Useless whinging about rude/clueless requests for help...
  • From: martin griffith
• Re: Useless whinging about rude/clueless requests for help...
  • From: martin griffith
• Re: How does DO-178 treat OEM modules (with software)?
  • From: FreeRTOS.org
• Re: Useless whinging about rude/clueless requests for help...
  • From: Grant Edwards
• Re: Useless whinging about rude/clueless requests for help...
  • From: Pete Fenelon
• Re: Useless whinging about rude/clueless requests for help...
  • From: Pete Fenelon
• Re: shame on MISRA
  • From: Chris Hills
• Re: How does DO-178 treat OEM modules (with software)?
  • From: Thomas Magma
• Walk In Interview in HCL Technolgies Bangalore on 31st March & 1st April 2007
  • From: girishvm2002
• Re: Useless whinging about rude/clueless requests for help...
  • From: Ulf Samuelsson
• Re: Useless whinging about rude/clueless requests for help...
  • From: Ulf Samuelsson
• Re: Nvram write modes and problems
  • From: Hans-Bernhard Bröker
• Re: Who is working with the SAM9263?
  • From: Ulf Samuelsson
• Re: Is this ARM possible?
  • From: Ulf Samuelsson
• Re: converting float to ascii w/o printf
  • From: Grant Edwards
• Re: Useless whinging about rude/clueless requests for help...
  • From: Grant Edwards
• Re: converting float to ascii w/o printf
  • From: Mark Walsh
• Re: How does DO-178 treat OEM modules (with software)?
  • From: Paul E. Bennett
• Re: Useless whinging about rude/clueless requests for help...
  • From: Tauno Voipio
• Re: converting float to ascii w/o printf
  • From: Vladimir Vassilevsky
• Re: Useless whinging about rude/clueless requests for help...
  • From: rickman
• Re: converting float to ascii w/o printf
  • From: ChrisQuayle
• Re: converting float to ascii w/o printf
  • From: ChrisQuayle
• Re: Useless whinging about rude/clueless requests for help...
  • From: Thomas Magma
• Re: "Executing code in SRAM" with AVR
  • From: Arlet
• How does DO-178 treat OEM modules (with software)?
  • From: Thomas Magma
• Re: shame on MISRA
  • From: ChrisQuayle
• Re: Useless whinging about rude/clueless requests for help...
  • From: Grant Edwards
• Re: Useless whinging about rude/clueless requests for help...
  • From: Vladimir Vassilevsky
• Re: Useless whinging about rude/clueless requests for help...
  • From: larwe
• Re: Useless whinging about rude/clueless requests for help...
  • From: Tim Wescott
• Re: converting float to ascii w/o printf
  • From: Grant Edwards
• Re: shame on MISRA
  • From: msg
• Re: shame on MISRA
  • From: Everett M. Greene
• Re: Is this ARM possible?
  • From: linnix
• Re: converting float to ascii w/o printf
  • From: Vladimir Vassilevsky
• Useless whinging about rude/clueless requests for help...
  • From: Grant Edwards
• Re: converting float to ascii w/o printf
  • From: ChrisQuayle
• Re: "Executing code in SRAM" with AVR
  • From: Herbert Kleebauer
• Re: shame on MISRA
  • From: Vladimir Vassilevsky
• Re: RTC PCF8563: Does not count
  • From: Thomas Entner
• Re: Nvram write modes and problems
  • From: Vladimir Vassilevsky
• Re: Nvram write modes and problems
  • From: Robert Adsett
• Re: "Executing code in SRAM" with AVR
  • From: jamie
• Re: Who is working with the SAM9263?
  • From: rickman
• Re: No results show up after "dow" and "con" in hypertrm
  • From: fouRmi
• Re: Nvram write modes and problems
  • From: Stef
• Re: Nvram write modes and problems
  • From: Tom Lucas
• Re: Nvram write modes and problems
  • From: ssubbarayan
• Re: Is this ARM possible?
  • From: Tom Lucas
• Re: shame on MISRA
  • From: CBFalconer
• Re: shame on MISRA
  • From: Tom Lucas
• Re: shame on MISRA
  • From: Tom Lucas
• Re: "Executing code in SRAM" with AVR
  • From: Al Borowski
• Re: Nvram write modes and problems
  • From: ssubbarayan
• Re: Nvram write modes and problems
  • From: Stef
• RTC PCF8563: Does not count
  • From: Thomas Entner
• Re: Is this ARM possible?
  • From: Chris Hills
• SPI-EEPROM read problem
  • From: techie.embedded@xxxxxxxxx
• "Executing code in SRAM" with AVR
  • From: jamie
• Re: shame on MISRA
  • From: Stefan Reuther
• ADV7125 - Blue and green output problem
  • From: Ace
• Re: Who is working with the SAM9263?
  • From: Ulf Samuelsson
• Re: Nvram write modes and problems
  • From: CBFalconer
• Re: Nvram write modes and problems
  • From: ssubbarayan
• Who is working with the SAM9263?
  • From: rickman
• Re: shame on MISRA
  • From: CBFalconer
• Re: shame on MISRA
  • From: CBFalconer
• Re: shame on MISRA
  • From: Dave Hansen
• Re: Atmel releasing FLASH AVR32 ?
  • From: Jim Granville
• Re: shame on MISRA
  • From: Richard Pennington
• Re: shame on MISRA
  • From: David Brown
• Re: converting float to ascii w/o printf
  • From: Ron Blancarte
• Is this ARM possible?
  • From: ghazanhaider
• Re: AVR: Confused About an Array of Functon Pointers at Runtime
  • From: Hans-Bernhard Bröker
• Re: shame on MISRA
  • From: Hans-Bernhard Bröker
• Re: 50+ MIPS flash MCU needed
  • From: rickman
• can problems with TJA1054
  • From: Adib Taraben
• Re: shame on MISRA
  • From: Richard Pennington
• Re: shame on MISRA
  • From: John Perry
• Re: converting float to ascii w/o printf
  • From: Everett M. Greene
• Re: 50+ MIPS flash MCU needed
  • From: linnix
• Re: shame on MISRA
  • From: Arlet
• Re: shame on MISRA
  • From: Stefan Reuther
• Re: shame on MISRA
  • From: Chris Hills
• Re: shame on MISRA
  • From: Chris Hills
• Re: shame on MISRA
  • From: Chris Hills
• Re: shame on MISRA
  • From: Chris Hills
• Re: NanoLOC
  • From: Adib . Taraben
• Re: shame on MISRA
  • From: Colin Paul Gloster
• Re: converting float to ascii w/o printf
  • From: Bill Davy
• Re: shame on MISRA
  • From: Colin Paul Gloster
• Re: 50+ MIPS flash MCU needed
  • From: rickman
• Making a HOBO Spill It's Guts to Non-Proprietary Software ?
  • From: Luminoso
• Re: Nvram write modes and problems
  • From: Vladimir Vassilevsky
• Re: shame on MISRA
  • From: Colin Paul Gloster
• Re: AVR: Confused About an Array of Functon Pointers at Runtime
  • From: Bo
• Re: shame on MISRA
  • From: Colin Paul Gloster
• Re: Nvram write modes and problems
  • From: Mark Borgerson
• Re: converting float to ascii w/o printf
  • From: Wilco Dijkstra
• Re: converting float to ascii w/o printf
  • From: John Speth
• Re: Nvram write modes and problems
  • From: Tom Lucas
• NanoLOC
  • From: Chris
• Re: shame on MISRA
  • From: Boudewijn Dijkstra
• Nvram write modes and problems
  • From: ssubbarayan
• Re: what is Microcontroller Subject about?
  • From: The Real Andy
• Re: Common software architecture for embedded systems
  • From: The Real Andy
• Re: shame on MISRA
  • From: Ulf Samuelsson
• Serializer/Deserializer with fibre connection, recommendations
  • From: Adib Taraben
• Openings for Sr./Jr. Software engineer's
  • From: adil . seige
• Openings for Device Drivers - linux - Kernel
  • From: adil . seige
• Openings for Device Drivers - linux - Kernel
  • From: adil . seige
• Re: converting float to ascii w/o printf
  • From: Paul Keinanen
• Re: Common software architecture for embedded systems
  • From: ssubbarayan
• Re: No results show up after "dow" and "con" in hypertrm
  • From: fouRmi
• Re: No results show up after "dow" and "con" in hypertrm
  • From: fouRmi
• Re: shame on MISRA
  • From: Jack Klein
• Re: converting float to ascii w/o printf
  • From: Thad Smith
• Re: converting float to ascii w/o printf
  • From: Ron Blancarte
• Re: shame on MISRA
  • From: CBFalconer
• Re: shame on MISRA
  • From: Paul E. Bennett
• Re: shame on MISRA
  • From: Vladimir Vassilevsky
• Re: shame on MISRA
  • From: Vladimir Vassilevsky
• Re: shame on MISRA
  • From: Chris Hills
• Re: shame on MISRA
  • From: Chris Hills
• Re: converting float to ascii w/o printf
  • From: Wilco Dijkstra
• Re: Common software architecture for embedded systems
  • From: Paul E. Bennett
• Re: converting float to ascii w/o printf
  • From: Anton Erasmus
• converting float to ascii w/o printf
  • From: Ron Blancarte
• Re: shame on MISRA
  • From: disident
• Re: shame on MISRA
  • From: disident
• Re: shame on MISRA
  • From: disident
• Re: Programming 74ALS188 PROM
  • From: Joachim Wunder
• Re: what is Microcontroller Subject about?
  • From: David Brown
• Re: Programming 74ALS188 PROM
  • From: Jim Granville
• Re: shame on MISRA
  • From: Steve at fivetrees
• Re: shame on MISRA
  • From: Grant Edwards
• Re: External interrupt
  • From: CBFalconer
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Chris Hills
• Re: Common software architecture for embedded systems
  • From: David R Brooks
• Re: what is Microcontroller Subject about?
  • From: cs_posting
• Re: shame on MISRA
  • From: Chris Hills
• Re: shame on MISRA
  • From: Paul E. Bennett
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: David Brown
• Re: arm-elf-gcc , assembler error, please help
  • From: bsd_mike
• Re: shame on MISRA
  • From: Chris Hills
• Re: shame on MISRA
  • From: Chris Hills
• Re: shame on MISRA
  • From: Chris Hills
• Re: arm-elf-gcc , assembler error, please help
  • From: Simon Clubley
• Re: Programming 74ALS188 PROM
  • From: Rafael Deliano
• Re: Programming 74ALS188 PROM
  • From: James Beck
• Re: arm-elf-gcc , assembler error, please help
  • From: FreeRTOS.org
• arm-elf-gcc , assembler error, please help
  • From: bsd_mike
• Re: No results show up after "dow" and "con" in hypertrm
  • From: linnix
• Re: Programming 74ALS188 PROM
  • From: Joachim Wunder
• Re: Programming 74ALS188 PROM
  • From: James Beck
• Re: shame on MISRA
  • From: Pete Fenelon
• Re: 50+ MIPS flash MCU needed
  • From: linnix
• Re: shame on MISRA
  • From: John Perry
• Re: shame on MISRA
  • From: Vladimir Vassilevsky
• Re: AT91SAM9260 booting and board questions
  • From: rickman
• Re: what is Microcontroller Subject about?
  • From: Grant Edwards
• Re: Common software architecture for embedded systems
  • From: Vladimir Vassilevsky
• Programming 74ALS188 PROM
  • From: Joachim Wunder
• Re: shame on MISRA
  • From: Arlet
• Re: Cheap, small quad UART needed
  • From: DJ Delorie
• Re: CRC calculation
  • From: hubbardd_2000
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Chris Hills
• Re: what is Microcontroller Subject about?
  • From: APS
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Clifford Heath
• Re: No results show up after "dow" and "con" in hypertrm
  • From: David Brown
• Re: shame on MISRA
  • From: Chris Hills
• Re: shame on MISRA
  • From: Chris Hills
• Re: what is Microcontroller Subject about?
  • From: David Brown
• Re: what is Microcontroller Subject about?
  • From: David Brown
• Re: Common software architecture for embedded systems
  • From: Boudewijn Dijkstra
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: David Brown
• No results show up after "dow" and "con" in hypertrm
  • From: fouRmi
• Re: Cheap, small quad UART needed
  • From: Jim Granville
• Re: Cheap, small quad UART needed
  • From: Meindert Sprang
• Re: 50+ MIPS flash MCU needed
  • From: Ulf Samuelsson
• Common software architecture for embedded systems
  • From: Baron Samedi
• Problem in Interrupt for USB device
  • From: kracks
• Re: shame on MISRA
  • From: Dan Henry
• Re: External interrupt
  • From: ssubbarayan
• Re: shame on MISRA
  • From: Dan Henry
• Re: shame on MISRA
  • From: Jack Klein
• Re: shame on MISRA
  • From: Al Balmer
• Re: shame on MISRA
  • From: Vladimir Vassilevsky
• Re: shame on MISRA
  • From: Paul E. Bennett
• Re: shame on MISRA
  • From: Pete Fenelon
• Re: shame on MISRA
  • From: Chris Hills
• shame on MISRA
  • From: disident
• Re: 50+ MIPS flash MCU needed
  • From: Robert . NXP
• Re: AT91SAM9260 booting and board questions
  • From: Jim Granville
• Re: what is Microcontroller Subject about?
  • From: Grant Edwards
• Re: 50+ MIPS flash MCU needed
  • From: Vladimir Vassilevsky
• Re: what is Microcontroller Subject about?
  • From: Paul Keinanen
• Re: what is Microcontroller Subject about?
  • From: rickman
• Re: what is Microcontroller Subject about?
  • From: rickman
• Re: what is Microcontroller Subject about?
  • From: rickman
• Re: AT91SAM9260 booting and board questions
  • From: rickman
• Re: 50+ MIPS flash MCU needed
  • From: rickman
• Re: Dual core processors-further querys
  • From: rickman
• Re: Opening for Java Developers in Bangalore and Hyderabad
  • From: Eric
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: CBFalconer
• Re: what is Microcontroller Subject about?
  • From: Ed Prochak
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Chris Hills
• Re: what is Microcontroller Subject about?
  • From: Grant Edwards
• Re: what is Microcontroller Subject about?
  • From: Pete Fenelon
• Re: what is Microcontroller Subject about?
  • From: cs_posting
• Re: what is Microcontroller Subject about?
  • From: Grant Edwards
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: David Brown
• Re: Codewarrior vs. Cosmic C for Freescale 9S08
  • From: Mr . C
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Chris Hills
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Chris Hills
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Gunther Mannigel
• Re: what is Microcontroller Subject about?
  • From: David Brown
• Re: what is Microcontroller Subject about?
  • From: Pete Fenelon
• Re: what is Microcontroller Subject about?
  • From: GM
• Re: 50+ MIPS flash MCU needed
  • From: David Brown
• Re: Difference between ARM and any other General Purpose Processor
  • From: David Brown
• Re: External interrupt
  • From: Zara
• Re: what is Microcontroller Subject about?
  • From: Rene Tschaggelar
• Re: External interrupt
  • From: galapogos
• Re: External interrupt
  • From: galapogos
• Re: External interrupt
  • From: Stephane
• FA/FS: PromICE; Tundra pci, Micron sdram components
  • From: Noah
• Re: External interrupt
  • From: Paul Keinanen
• Xilinx EDK and Custom Peripheral: error occur when generating bitstream
  • From: Allen
• Re: External interrupt
  • From: Jim Granville
• Re: External interrupt
  • From: Ed Prochak
• Re: Looking for recommendations: schematic reading turotial
  • From: Ed Prochak
• Re: Looking for recommendations: schematic reading turotial
  • From: Ed Prochak
• External interrupt
  • From: galapogos
• Re: what is Microcontroller Subject about?
  • From: Ed Prochak
• Re: what is Microcontroller Subject about?
  • From: Paul Gotch
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Marius . Hancu
• Re: 50+ MIPS flash MCU needed
  • From: Jim Granville
• Re: what is Microcontroller Subject about?
  • From: Grant Edwards
• Re: 50+ MIPS flash MCU needed
  • From: Jim Granville
• Re: Difference between ARM and any other General Purpose Processor
  • From: Alt Beer
• Re: URGENT: A Question about ZIF and Master Sockets
  • From: Deep Reset
• Re: what is Microcontroller Subject about?
  • From: hassanishome
• Re: what is Microcontroller Subject about?
  • From: msg
• Re: what is Microcontroller Subject about?
  • From: martin griffith
• Re: 50+ MIPS flash MCU needed
  • From: Mike Harrison
• Re: what is Microcontroller Subject about?
  • From: FreeRTOS.org
• Re: what is Microcontroller Subject about?
  • From: larwe
• URGENT: A Question about ZIF and Master Sockets
  • From: hassanishome
• what is Microcontroller Subject about?
  • From: hassanishome
• a question in 8051 microcontroller
  • From: hassanishome
• 50+ MIPS flash MCU needed
  • From: Antti
• Re: 8051
  • From: Chris Hills
• Re: AT91SAM9260 booting and board questions
  • From: vorange
• Re: 8051
  • From: Donald
• Re: Difference between ARM and any other General Purpose Processor
  • From: David Kelly
• Re: Opening for Java Developers in Bangalore and Hyderabad
  • From: CBFalconer
• Re: 8051
  • From: mack
• Re: Codewarrior vs. Cosmic C for Freescale 9S08
  • From: AmitMalyala
• Re: Dual core processors-further querys
  • From: salaria
• Re: AT91SAM9260 booting and board questions
  • From: Chris Hills
• Re: AT91SAM9260 booting and board questions
  • From: Ulf Samuelsson
• Re: Difference between ARM and any other General Purpose Processor
  • From: Robert Kaiser
• Re: AT91SAM9260 booting and board questions
  • From: Chris Hills
• Re: AT91SAM9260 booting and board questions
  • From: Ulf Samuelsson
• Re: AT91SAM9260 booting and board questions
  • From: Chris Hills
• Re: Help with interrupts please
  • From: panfilero
• Re: Help with interrupts please
  • From: Jim Granville
• Re: Help with interrupts please
  • From: panfilero
• Re: Help with interrupts please
  • From: Jack Klein
• Help with interrupts please
  • From: panfilero
• Re: Atmel releasing FLASH AVR32 ?
  • From: Ulf Samuelsson
• Re: Looking for recommendations: schematic reading turotial
  • From: Jonathan Kirwan
• Re: Looking for recommendations: schematic reading turotial
  • From: Jonathan Kirwan
• Re: Looking for recommendations: schematic reading turotial
  • From: Adrian
• Re: Stack growth towards high addresses?
  • From: Grant Edwards
• Re: Stack growth towards high addresses?
  • From: larwe
• Re: Difference between ARM and any other General Purpose Processor
  • From: Frank Miles
• Re: Stack growth towards high addresses?
  • From: Vladimir Vassilevsky
• Re: Difference between ARM and any other General Purpose Processor
  • From: Paul Gotch
• Re: Looking for recommendations: schematic reading turotial
  • From: Ed Prochak
• Re: Stack growth towards high addresses?
  • From: msg
• Re: Atmel releasing FLASH AVR32 ?
  • From: Wilco Dijkstra
• Re: Difference between ARM and any other General Purpose Processor
  • From: Ulf Samuelsson
• Re: AT91SAM9260 booting and board questions
  • From: Ulf Samuelsson
• Re: Stack growth towards high addresses?
  • From: larwe
• Re: Stack growth towards high addresses?
  • From: Ken Asbury
• Stack growth towards high addresses?
  • From: Vladimir Vassilevsky
• Re: Stack growth towards high addresses?
  • From: Vladimir Vassilevsky
• CompactFlash-Disk with network connection...
  • From: Thomas Obermair
• Re: Stack growth towards high addresses?
  • From: larwe
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: wertyWasHere
• Re: Difference between ARM and any other General Purpose Processor
  • From: wertyWasHere
• Re: To queue or not to queue
  • From: Adrian
• Re: AT91SAM9260 booting and board questions
  • From: Chris Hills
• Re: Difference between ARM and any other General Purpose Processor
  • From: borkhuis
• Re: Difference between ARM and any other General Purpose Processor
  • From: CBFalconer
• Re: Difference between ARM and any other General Purpose Processor
  • From: Stan
• Re: Difference between ARM and any other General Purpose Processor
  • From: Ulf Samuelsson
• Re: Difference between ARM and any other General Purpose Processor
  • From: Pete Fenelon
• Re: Looking for recommendations: schematic reading turotial
  • From: KHR
• Difference between ARM and any other General Purpose Processor
  • From: Sikandar
• Re: Dual core processors-further querys
  • From: ssubbarayan
• Re: Looking for recommendations: schematic reading turotial
  • From: Jim Granville
• Re: Looking for recommendations: schematic reading turotial
  • From: Jack Klein
• Re: Atmel releasing FLASH AVR32 ?
  • From: Ulf Samuelsson
• Re: DDK for Windows 2000
  • From: ghelbig
• Re: AVR: Confused About an Array of Functon Pointers at Runtime
  • From: Anton Erasmus
• Re: Atmel releasing FLASH AVR32 ?
  • From: Wilco Dijkstra
• Re: Atmel releasing FLASH AVR32 ?
  • From: Jim Granville
• HC11 EVS board specific problems
  • From: stewart . t
• Re: Atmel releasing FLASH AVR32 ?
  • From: Ulf Samuelsson
• Re: Atmel releasing FLASH AVR32 ?
  • From: Wilco Dijkstra
• Re: Atmel releasing FLASH AVR32 ?
  • From: Ulf Samuelsson
• Re: Atmel releasing FLASH AVR32 ?
  • From: Ulf Samuelsson
• Re: Atmel releasing FLASH AVR32 ?
  • From: Wilco Dijkstra
• Re: Atmel releasing FLASH AVR32 ?
  • From: Wilco Dijkstra
• Re: 8051
  • From: wertyWasHere
• FreeRTOS on PSoC
  • From: Eric
• Re: Dual core processors-further querys
  • From: Joseph
• DDK for Windows 2000
  • From: SWDeveloper
• Re: Minimal BOM for bidirectional RF point-to-multipoint RF link?
  • From: Robert Lacoste
• Re: Atmel releasing FLASH AVR32 ?
  • From: Ulf Samuelsson
• Re: Atmel releasing FLASH AVR32 ?
  • From: Wilco Dijkstra
• Re: To queue or not to queue
  • From: The Real Andy
• Re: Minimal BOM for bidirectional RF point-to-multipoint RF link?
  • From: larwe
• Re: Minimal BOM for bidirectional RF point-to-multipoint RF link?
  • From: larwe
• Re: Minimal BOM for bidirectional RF point-to-multipoint RF link?
  • From: larwe
• Re: Software debugging tools for custom micro-controller core
  • From: David Brown
• Re: Atmel releasing FLASH AVR32 ?
  • From: Ulf Samuelsson
• Re: AVR: Confused About an Array of Functon Pointers at Runtime
  • From: David R Brooks
• Re: Minimal BOM for bidirectional RF point-to-multipoint RF link?
  • From: Robert Lacoste
• Re: Atmel releasing FLASH AVR32 ?
  • From: CBFalconer
• Re: Bit bang speed on AT91SAM9261 ARM processor
  • From: Jim Granville
• Re: Atmel releasing FLASH AVR32 ?
  • From: Jim Granville
• Re: Atmel releasing FLASH AVR32 ?
  • From: Jonathan Kirwan
• Dual core processors-further querys
  • From: ssubbarayan
• Re: Minimal BOM for bidirectional RF point-to-multipoint RF link?
  • From: msg
• Re: Minimal BOM for bidirectional RF point-to-multipoint RF link?
  • From: CBFalconer
• Re: Looking for a 6809E User Manual in PDF.
  • From: CBFalconer
• Re: Atmel releasing FLASH AVR32 ?
  • From: CBFalconer
• Re: Looking for recommendations: schematic reading turotial
  • From: CBFalconer
• Re: Minimal BOM for bidirectional RF point-to-multipoint RF link?
  • From: larwe
• wavecom gr64 blues
  • From: adams10
• mc55 interface with microcontroller 8051
  • From: brvinodh_57
• Re: Atmel releasing FLASH AVR32 ?
  • From: Jim Granville
• Re: Printer interface
  • From: Davide Guolo
• Re: Minimal BOM for bidirectional RF point-to-multipoint RF link?
  • From: msg
• Re: Atmel releasing FLASH AVR32 ?
  • From: Wilco Dijkstra
• Re: Atmel releasing FLASH AVR32 ?
  • From: Wilco Dijkstra
• Re: Bit bang speed on AT91SAM9261 ARM processor
  • From: Ulf Samuelsson
• Re: Atmel releasing FLASH AVR32 ?
  • From: Ulf Samuelsson
• Re: Atmel releasing FLASH AVR32 ?
  • From: Jonathan Kirwan
• Re: Looking for recommendations: schematic reading turotial
  • From: Paul Keinanen
• Re: Looking for a 6809E User Manual in PDF.
  • From: Paul E. Bennett
• Re: Bit bang speed on AT91SAM9261 ARM processor
  • From: Jim Granville
• Re: Atmel releasing FLASH AVR32 ?
  • From: Jim Granville
• Re: Atmel releasing FLASH AVR32 ?
  • From: Jim Granville
• Re: Atmel releasing FLASH AVR32 ?
  • From: Ulf Samuelsson
• Re: Bit bang speed on AT91SAM9261 ARM processor
  • From: aniloyo2
• Re: Atmel releasing FLASH AVR32 ?
  • From: Wilco Dijkstra
• Re: Atmel releasing FLASH AVR32 ?
  • From: Jim Granville
• Re: OT: Printer interface
  • From: Jim Stewart
• Re: AVR: Confused About an Array of Functon Pointers at Runtime
  • From: Anton Erasmus
• Re: Looking for recommendations: schematic reading turotial
  • From: Jonathan Kirwan
• Re: OT: Printer interface
  • From: larwe
• Re: AT91SAM9260 booting and board questions
  • From: shinystartrek
• Re: Minimal BOM for bidirectional RF point-to-multipoint RF link?
  • From: larwe
• OT: Printer interface
  • From: Everett M. Greene
• Re: Atmel releasing FLASH AVR32 ?
  • From: Ulf Samuelsson
• Re: Minimal BOM for bidirectional RF point-to-multipoint RF link?
  • From: ElderUberGeek
• Re: Looking for recommendations: schematic reading turotial
  • From: Ed Prochak
• Re: AVR: Confused About an Array of Functon Pointers at Runtime
  • From: Adrian
• Re: Minimal BOM for bidirectional RF point-to-multipoint RF link?
  • From: larwe
• Minimal BOM for bidirectional RF point-to-multipoint RF link?
  • From: ElderUberGeek
• Re: Confused About an Array of Functon Pointers at Runtime
  • From: andrew queisser
• Re: Digital and Analog power decouplings
  • From: Paul Taylor
• Re: Looking for recommendations: schematic reading turotial
  • From: Adrian
• Re: Looking for recommendations: schematic reading turotial
  • From: Ignacio G.T.
• Re: power pc program interrupt
  • From: Didi
• Re: IAR Embedded Workbench IDE
  • From: TheDoc
• Problem While Selecting Bank in PIC16F73
  • From: Charan
• PLB_Abort timing closure
  • From: jetmarc
• Re: power pc program interrupt
  • From: eascheiber
• Pt1000 4-20mA interface, any alternative to XTR114?
  • From: Rob Horton
• [ANN] XSD/e 1.0.0 - embedded XML parsing, validation and C++ data binding
  • From: Boris Kolpackov
• Re: Atmel releasing FLASH AVR32 ?
  • From: Jim Granville
• Re: Atmel releasing FLASH AVR32 ?
  • From: Jim Granville
• Re: Atmel releasing FLASH AVR32 ?
  • From: Ulf Samuelsson
• Re: Confused About an Array of Functon Pointers at Runtime
  • From: the el vez
• Re: Looking for a 6809E User Manual in PDF.
  • From: Paul Marciano
• Re: Regarding Dual core processors
  • From: ssubbarayan
• Re: Confused About an Array of Functon Pointers at Runtime
  • From: Leo Havmøller
• Re: accessing & clearing memory using C
  • From: techie.embedded@xxxxxxxxx
• AVR: Confused About an Array of Functon Pointers at Runtime
  • From: the el vez
• uC with AES hardware coprocessor?
  • From: David Kelly
• Re: IAR Embedded Workbench IDE
  • From: Jonathan Kirwan
• Re: Bit bang speed on AT91SAM9261 ARM processor
  • From: Jim Granville
• Re: Atmel releasing FLASH AVR32 ?
  • From: Wilco Dijkstra
• Re: Atmel releasing FLASH AVR32 ?
  • From: Jim Granville
• Re: Atmel releasing FLASH AVR32 ?
  • From: Jim Granville
• Re: Atmel releasing FLASH AVR32 ?
  • From: Wilco Dijkstra
• Re: power pc program interrupt
  • From: Robert Adsett
• Re: To queue or not to queue
  • From: Robert Adsett
• Re: IAR Embedded Workbench IDE
  • From: Ulf Samuelsson
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: CBFalconer
• Re: Speed/power tradeoff in ARMs
  • From: Ulf Samuelsson
• Re: Bit bang speed on AT91SAM9261 ARM processor
  • From: Ulf Samuelsson
• Re: IAR Embedded Workbench IDE
  • From: Jonathan Kirwan
• Re: IAR Embedded Workbench IDE
  • From: Pete Fenelon
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Pete Fenelon
• Re: Atmel releasing FLASH AVR32 ?
  • From: linnix
• To queue or not to queue
  • From: Ivanna Pee
• Re: Atmel releasing FLASH AVR32 ?
  • From: Eric
• Re: Bit bang speed on AT91SAM9261 ARM processor
  • From: Eric
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Jim Stewart
• Re: power pc program interrupt
  • From: eascheiber
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Robert Sneddon
• Re: Bit bang speed on AT91SAM9261 ARM processor
  • From: linnix
• Re: IAR Embedded Workbench IDE
  • From: Mark Borgerson
• Re: Bit bang speed on AT91SAM9261 ARM processor
  • From: aniloyo2
• Re: IAR Embedded Workbench IDE
  • From: Ulf Samuelsson
• Re: IAR Embedded Workbench IDE
  • From: Ulf Samuelsson
• Re: Looking for recommendations: schematic reading turotial
  • From: Adrian
• Re: Atmel releasing FLASH AVR32 ?
  • From: Ulf Samuelsson
• Re: Bit bang speed on AT91SAM9261 ARM processor
  • From: linnix
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Ken Asbury
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Pete Fenelon
• Re: Looking for recommendations: schematic reading turotial
  • From: msg
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Vladimir Vassilevsky
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Paul Keinanen
• Re: AT91SAM7X256 watchdog interrupt
  • From: vizzz
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: cs_posting
• Re: AT91SAM7X256 watchdog interrupt
  • From: FreeRTOS.org
• Re: AT91SAM7X256 watchdog interrupt
  • From: FreeRTOS.org
• Re: IAR Embedded Workbench IDE
  • From: You Know Who
• Camera module with fast wakeup time
  • From: Sal P.
• Re: IAR Embedded Workbench IDE
  • From: kkkisok
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Robert Sneddon
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: kkkisok
• AT91SAM7X256 watchdog interrupt
  • From: vizzz
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: kkkisok
• Re: Atmel releasing FLASH AVR32 ?
  • From: Wilco Dijkstra
• Re: IAR Embedded Workbench IDE
  • From: Ulf Samuelsson
• Re: IAR Embedded Workbench IDE
  • From: larwe
• Re: power pc program interrupt
  • From: Michael N. Moran
• Re: Regarding Dual core processors
  • From: Paul Keinanen
• Re: Atmel releasing FLASH AVR32 ?
  • From: Ulf Samuelsson
• Re: Cheap, small quad UART needed
  • From: Ulf Samuelsson
• Re: IAR Embedded Workbench IDE
  • From: Mike Harrison
• Re: IAR Embedded Workbench IDE
  • From: Tom Lucas
• IAR Embedded Workbench IDE
  • From: You Know Who
• Re: power pc program interrupt
  • From: eascheiber
• Re: Speed/power tradeoff in ARMs
  • From: Jim Granville
• Re: power pc program interrupt
  • From: David R Brooks
• Re: Atmel releasing FLASH AVR32 ?
  • From: Jim Granville
• power pc program interrupt
  • From: eascheiber
• Re: Bit bang speed on AT91SAM9261 ARM processor
  • From: Jim Granville
• Re: accessing & clearing memory using C
  • From: Anders
• Re: Hi-Tech C object file format and 'dump.exe' output description (compilers ca. 1990)
  • From: msg
• accessing & clearing memory using C
  • From: techie.embedded@xxxxxxxxx
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Mark McDougall
• Re: 8051
  • From: Neil
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Neil
• Bit bang speed on AT91SAM9261 ARM processor
  • From: aniloyo2
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: John Larkin
• Speed/power tradeoff in ARMs
  • From: rickman
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Jim Stewart
• Re: One of the 200 interrupts does not get executed sometimes due to a single statement
  • From: Rufus V. Smith
• Re: One of the 200 interrupts does not get executed sometimes due to a single statement
  • From: Rufus V. Smith
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Spehro Pefhany
• Re: Atmel releasing FLASH AVR32 ?
  • From: rickman
• Re: Atmel releasing FLASH AVR32 ?
  • From: Jim Granville
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Mark McDougall
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Mark McDougall
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: CBFalconer
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Paul Carpenter
• Re: 8051
  • From: Wim Ton
• Re: Atmel releasing FLASH AVR32 ?
  • From: Arie de Muynck
• Re: HC12 (+ Ethernet) development kit ?
  • From: David Kelly
• Re: 8051
  • From: Anders
• Re: Software debugging tools for custom micro-controller core
  • From: -jg
• Re: Software debugging tools for custom micro-controller core
  • From: Stephen Pelc
• Re: Atmel releasing FLASH AVR32 ?
  • From: tesla
• Hi-Tech C object file format and 'dump.exe' output description (compilers ca. 1990)
  • From: msg
• Re: Software debugging tools for custom micro-controller core
  • From: Paul E. Bennett
• Re: Software debugging tools for custom micro-controller core
  • From: Grant Edwards
• Re: source for graphic lcd: 132x64 with sitronix ST7565?
  • From: 4MLA1FN
• Re: Software debugging tools for custom micro-controller core
  • From: linnix
• Software debugging tools for custom micro-controller core
  • From: vlsi4all
• Re: Atmel releasing FLASH AVR32 ?
  • From: Ulf Samuelsson
• Re: 8051
  • From: Peter Dickerson
• Re: 8051
  • From: linnix
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Roberto Waltman
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Dan N
• Re: source for graphic lcd: 132x64 with sitronix ST7565?
  • From: RaceMouse
• Re: OT: Strange IBM motherboards
  • From: linnix
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Pete Fenelon
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: John Speth
• Re: 8051
  • From: cs_posting
• Re: 8051
  • From: mack
• source for graphic lcd: 132x64 with sitronix ST7565?
  • From: 4MLA1FN
• Re: composite video -> SD card
  • From: 4MLA1FN
• Re: 8051
  • From: David Brown
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: David Brown
• Re: Regarding Dual core processors
  • From: David Brown
• 8051
  • From: mack
• MiDataSets (multiple inputs) for MiBench benchmark to enable more realistic benchmarking and iterative optimizations
  • From: Grigori Fursin
• Re: Regarding Dual core processors
  • From: Michael N. Moran
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: Bill Davy
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Pete Fenelon
• Atmel releasing FLASH AVR32 ?
  • From: -jg
• Re: Regarding Dual core processors
  • From: Chris Hills
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: David Brown
• Re: Regarding Dual core processors
  • From: Paul Keinanen
• Re: Initializations in assembly or C : which is favourable ? why ?
  • From: David Brown
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Ian Bell
• Re: Looking for recommendations: schematic reading [tutorial]
  • From: JeffM
• Re: Looking for recommendations: schematic reading turotial
  • From: CBFalconer
• Re: SPI driver for arm running linux
  • From: Ali
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Roman
• Looking for recommendations: schematic reading turotial
  • From: Jack Klein
• Re: Regarding Dual core processors
  • From: Dennis
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Mark McDougall
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: CBFalconer
• Re: How ordinary embedded differs from RTOS code?
  • From: Gene S . Berkowitz
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Everett M. Greene
• Re: SPI driver for arm running linux
  • From: Remis Norvilis
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Michael R. Kesti
• Re: SPI driver for arm running linux
  • From: linnix
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Grant Edwards
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Michael R. Kesti
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Michael R. Kesti
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: cs_posting
• Re: How to connect two Ethernet PHY devices on the same PCB point-to-point ?
  • From: Stan Katz
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Grant Edwards
• Ethernet controller question
  • From: zigbee
• Ethernet controller question
  • From: zigbee
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Al
• Re: floopy drive and usb...
  • From: larwe
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Roman
• Re: floopy drive and usb...
  • From: SMS
• Re: How ordinary embedded differs from RTOS code?
  • From: CBFalconer
• Re: How ordinary embedded differs from RTOS code?
  • From: ElderUberGeek
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: ElderUberGeek
• Re: Regarding Dual core processors
  • From: Chris Hills
• Re: AT91SAM9260 booting and board questions
  • From: Bool
• SPI driver for arm running linux
  • From: Ali
• How to connect two Ethernet PHY devices on the same PCB point-to-point ?
  • From: John Babcock
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Pete Fenelon
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: larwe
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: charleso
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: robers97
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: John Larkin
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: larwe
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Grant Edwards
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Pete Fenelon
• Re: OT: Strange IBM motherboards
  • From: Roman
• Re: Cheap, small quad UART needed
  • From: Ulf Samuelsson
• Re: OT: Strange IBM motherboards
  • From: Tim Wescott
• Re: Cheap, small quad UART needed
  • From: Jonathan Kirwan
• Re: Initializations in assembly or C : which is favourable ? why ?
  • From: PARTICLEREDDY (STRAYDOG)
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Richard H.
• Re: Microblaze gone wild
  • From: eascheiber
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Grant Edwards
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Pete Fenelon
• Re: Wearing a suit to an interview is a mild form of hazing
  • From: Mark Walsh
• Wearing a suit to an interview is a mild form of hazing
  • From: BubbaGump
• Re: Cheap, small quad UART needed
  • From: Ulf Samuelsson
• Re: Regarding Dual core processors
  • From: Clifford Heath
• OT: Strange IBM motherboards
  • From: linnix
• Re: Regarding Dual core processors
  • From: CBFalconer
• Re: Chipcon/8051 sanity check
  • From: -jg
• Re: Cost analysis for Embedded Linux?
  • From: Alex Gibson
• Re: Cheap, small quad UART needed
  • From: -jg
• Re: How ordinary embedded differs from RTOS code?
  • From: Dan Henry
• Re: Cheap, small quad UART needed
  • From: rickman
• Re: Regarding Dual core processors
  • From: Clifford Heath
• OT - Safety recall, Amprobe Digital Clamp meters
  • From: Jim Stewart
• Re: Cheap, small quad UART needed
  • From: Roman
• Re: Implementing USB Host to read USB pen drive
  • From: Don McKenzie
• Re: Initializations in assembly or C : which is favourable ? why ?
  • From: SWDeveloper
• Re: Initializations in assembly or C : which is favourable ? why ?
  • From: Vladimir Vassilevsky
• Re: Board testing in production
  • From: Roman
• Re: Cheap, small quad UART needed
  • From: Meindert Sprang
• Re: Cheap, small quad UART needed
  • From: Everett M. Greene
• Re: Board testing in production
  • From: larwe
• Re: How ordinary embedded differs from RTOS code?
  • From: Adrian
• Re: How ordinary embedded differs from RTOS code?
  • From: Ed Prochak
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: linnix
• Re: PID algorithm in C
  • From: linnix
• Re: PID algorithm in C
  • From: Tim Wescott
• Re: How ordinary embedded differs from RTOS code?
  • From: Tim Wescott
• Re: Different devices on RS485 line?
  • From: Bob
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: Bill Davy
• Re: AT91SAM9260 booting and board questions
  • From: Not Really Me
• Re: How ordinary embedded differs from RTOS code?
  • From: Tom Lucas
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: David Brown
• How ordinary embedded differs from RTOS code?
  • From: Madhanbm
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: Bill Davy
• Re: Microblaze gone wild
  • From: Zara
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: Bill Davy
• Re: Microblaze gone wild
  • From: eascheiber
• mowwf opcode is same for all 14bit pic?
  • From: Account1
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: Boudewijn Dijkstra
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: David Brown
• Re: Implementing USB Host to read USB pen drive
  • From: David Brown
• Re: Microblaze gone wild
  • From: Zara
• Re: Is it possible to put 2 ethernet phys back to back ?
  • From: ghelbig
• Re: Different devices on RS485 line?
  • From: Meindert Sprang
• Microblaze gone wild
  • From: eascheiber
• Different devices on RS485 line?
  • From: ElderUberGeek
• Re: Cheap, small quad UART needed
  • From: Meindert Sprang
• Re: Regarding Dual core processors
  • From: Paul Keinanen
• Re: Cheap, small quad UART needed
  • From: Jonathan Kirwan
• Re: What is the simplest CPU GCC is ported for?
  • From: Ulf Samuelsson
• Re: Implementing USB Host to read USB pen drive
  • From: Ulf Samuelsson
• Re: Cheap, small quad UART needed
  • From: Ulf Samuelsson
• Re: AT91SAM9260 booting and board questions
  • From: Ulf Samuelsson
• Re: AT91SAM9260 booting and board questions
  • From: Ulf Samuelsson
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: Leo Havmøller
• Re: Board testing in production
  • From: rickman
• Re: Implementing USB Host to read USB pen drive
  • From: Clifford Heath
• Re: Regarding Dual core processors
  • From: Roberto Waltman
• Re: floopy drive and usb...
  • From: Roberto Waltman
• Re: Implementing USB Host to read USB pen drive
  • From: djordj
• Re: Implementing USB Host to read USB pen drive
  • From: djordj
• Re: Embedded Bluetooth module VS USB dongle
  • From: Meindert Sprang
• Re: Cheap, small quad UART needed
  • From: antedeluvian
• Re: Cheap, small quad UART needed
  • From: jetq88
• Re: Embedded Bluetooth module VS USB dongle
  • From: andrew queisser
• Re: Cheap, small quad UART needed
  • From: Grzegorz Mazur
• Re: Cheap, small quad UART needed
  • From: Mike Harrison
• Re: Embedded Bluetooth module VS USB dongle
  • From: Mike Harrison
• Embedded Bluetooth module VS USB dongle
  • From: Clint Sharp
• Re: PID algorithm in C
  • From: James Beck
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: andrew queisser
• Re: Cheap, small quad UART needed
  • From: Meindert Sprang
• Re: Cheap, small quad UART needed
  • From: Meindert Sprang
• Re: Cheap, small quad UART needed
  • From: Meindert Sprang
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: linnix
• Re: FPGA for 8051core??
  • From: Neha
• Re: Cheap, small quad UART needed
  • From: DJ Delorie
• Re: PID algorithm in C
  • From: larwe
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: larwe
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: Bill Davy
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: Boudewijn Dijkstra
• Re: AT91SAM9260 booting and board questions
  • From: shinystartrek
• Re: PID algorithm in C
  • From: James Beck
• Re: High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: Not Really Me
• Re: AT91SAM9260 booting and board questions
  • From: Not Really Me
• Re: Implementing USB Host to read USB pen drive
  • From: David Brown
• Re: Implementing USB Host to read USB pen drive
  • From: Mike Harrison
• Re: Cheap, small quad UART needed
  • From: Mike Harrison
• Re: FPGA for 8051core??
  • From: HT-Lab
• Re: Cheap, small quad UART needed
  • From: kkkisok
• Re: Regarding Dual core processors
  • From: CBFalconer
• FPGA for 8051core??
  • From: Neha
• Re: Board testing in production
  • From: larwe
• High Speed USB 2.0 (Target) + CPU + 2GByte RAM - suitable processor?
  • From: Bill Davy
• Re: Implementing USB Host to read USB pen drive
  • From: Michael N. Moran
• Re: Regarding Dual core processors
  • From: Clifford Heath
• Cheap, small quad UART needed
  • From: Meindert Sprang
• floopy drive and usb...
  • From: gops
• Re: PID algorithm in C
  • From: Paul Taylor
• Re: Board testing in production
  • From: shinystartrek
• Implementing USB Host to read USB pen drive
  • From: djordj
• Re: Splitting a serial (RS232) port signal?
  • From: Roman
• Re: Board testing in production
  • From: Roman
• Board testing in production
  • From: shinystartrek
• Re: AT91SAM9260 booting and board questions
  • From: shinystartrek
• Re: composite video -> SD card
  • From: peterldr
• Re: Regarding Dual core processors
  • From: CBFalconer
• Re: What does "embedded firmware" really mean?
  • From: CBFalconer
• Re: msp430: disassembling raw binary
  • From: 4MLA1FN
• Take VDC's New Survey on Embedded System Engineering -- Get a free report and enter to win an Amazon gift certificate
  • From: VDC
• Re: AT91SAM9260 booting and board questions
  • From: Arlet
• Re: AT91SAM9260 booting and board questions
  • From: Arlet
• Re: Any experience/comments for STR9 Com Stick?
  • From: linnix
• Re: PID algorithm in C
  • From: Paul Carpenter
• Re: AT91SAM9260 booting and board questions
  • From: linnix
• Re: msp430: disassembling raw binary
  • From: Grant Edwards
• Re: PID algorithm in C
  • From: Rene Tschaggelar
• Re: Any experience/comments for STR9 Com Stick?
  • From: looking
• Re: AT91SAM9260 booting and board questions
  • From: shinystartrek
• AT91SAM9260 booting and board questions
  • From: shinystartrek
• Discuxx.com had tons of comp embedded quick news! WOW!
  • From: Benjamin Yau
• Re: msp430: disassembling raw binary
  • From: Arlet
• Re: Regarding Dual core processors
  • From: Robert Kaiser
• Re: PID algorithm in C
  • From: linnix
• Re: msp430: disassembling raw binary
  • From: Grant Edwards
• Re: msp430: disassembling raw binary
  • From: Arlet
• Re: PID algorithm in C
  • From: Everett M. Greene
• Re: msp430: disassembling raw binary
  • From: Grant Edwards
• Re: PID algorithm in C
  • From: linnix
• Re: PID algorithm in C
  • From: Spehro Pefhany
• Re: What does "embedded firmware" really mean?
  • From: cs_posting
• Re: PID algorithm in C
  • From: linnix
• Re: PID algorithm in C
  • From: Mike Noone
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Joerg
• Re: Regarding Dual core processors
  • From: Clifford Heath
• Re: What does "embedded firmware" really mean?
  • From: Clifford Heath
• Re: PID algorithm in C
  • From: linnix
• Re: PID algorithm in C
  • From: Vladimir Vassilevsky
• Re: PID algorithm in C
  • From: Mike Noone
• Re: msp430: mspgcc tool chain and iar kickstart question
  • From: CBFalconer
• Re: PID algorithm in C
  • From: Vladimir Vassilevsky
• Re: msp430: mspgcc tool chain and iar kickstart question
  • From: 4MLA1FN
• Re: msp430: disassembling raw binary
  • From: 4MLA1FN
• Re: msp430: mspgcc tool chain and iar kickstart question
  • From: 4MLA1FN
• Re: PID algorithm in C
  • From: Mike Noone
• Re: PID algorithm in C
  • From: Mike Noone
• Re: msp430: disassembling raw binary
  • From: Grant Edwards
• Re: msp430: mspgcc tool chain and iar kickstart question
  • From: Grant Edwards
• Re: msp430: mspgcc tool chain and iar kickstart question
  • From: 4MLA1FN
• msp430: disassembling raw binary
  • From: 4MLA1FN
• Re: msp430: mspgcc tool chain and iar kickstart question
  • From: Grant Edwards
• Re: PID algorithm in C
  • From: Vladimir Vassilevsky
• Re: msp430: mspgcc tool chain and iar kickstart question
  • From: 4MLA1FN
• Re: LCD prototype
  • From: steve
• pic 16fx opcodes
  • From: Account1
• Re: PID algorithm in C
  • From: Mike Noone
• Re: Initializations in assembly or C : which is favourable ? why ?
  • From: Peter Dickerson
• Re: PID algorithm in C
  • From: Tom Lucas
• Re: PID algorithm in C
  • From: Paul Carpenter
• Re: composite video -> SD card
  • From: spartan3wiz
• Re: PID algorithm in C
  • From: Rene Tschaggelar
• Re: LCD prototype
  • From: Joe G \(Home\)
• Re: msp430 jtag: does usb = parallel + par-to-usb cable?
  • From: 4MLA1FN
• Re: msp430 jtag: does usb = parallel + par-to-usb cable?
  • From: Grant Edwards
• Re: PID algorithm in C
  • From: Tim Wescott
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Marius . Hancu
• Re: PID algorithm in C
  • From: sdeyoreo
• Re: What is the simplest CPU GCC is ported for?
  • From: Jim Granville
• Re: What is the simplest CPU GCC is ported for?
  • From: Steve Calfee
• Re: msp430 jtag: does usb = parallel + par-to-usb cable?
  • From: CBFalconer
• Re: Initializations in assembly or C : which is favourable ? why ?
  • From: CBFalconer
• Re: Implementing critical sections on AVR 8 bit processors
  • From: CBFalconer
• Re: What is the simplest CPU GCC is ported for?
  • From: Ulf Samuelsson
• Re: PID algorithm in C
  • From: Jonathan Kirwan
• Re: Any experience/comments for STR9 Com Stick?
  • From: Steve Calfee
• Re: PID algorithm in C
  • From: Tim Wescott
• Re: composite video -> SD card
  • From: linnix
• Re: Chipcon/8051 sanity check
  • From: FreeRTOS.org
• Re: Implementing critical sections on AVR 8 bit processors
  • From: Arlet
• composite video -> SD card
  • From: 4MLA1FN
• Re: Chipcon/8051 sanity check
  • From: Jim Granville
• Re: Implementing critical sections on AVR 8 bit processors
  • From: Hans-Bernhard Bröker
• PID algorithm in C
  • From: TenmaNeko
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Joerg
• Re: Chipcon/8051 sanity check
  • From: FreeRTOS.org
• Re: C Coding style question
  • From: Pete Fenelon
• Re: LCD prototype
  • From: okalex
• Re: C Coding style question
  • From: Jonathan Kirwan
• Re: C Coding style question
  • From: Arlet
• Re: Experiences with FreeRTOS?
  • From: Chris Hills
• Re: LCD prototype
  • From: John Devereux
• LCD prototype
  • From: okalex
• Re: So what is the difference between a software engineer and computer scientist?
  • From: Ed Prochak
• Re: Chipcon/8051 sanity check
  • From: Jim Granville
• Re: Chipcon/8051 sanity check
  • From: FreeRTOS.org
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: linnix
• Re: msp430: mspgcc tool chain and iar kickstart question
  • From: 4MLA1FN
• Re: C Coding style question
  • From: Vladimir Vassilevsky
• Re: msp430: mspgcc tool chain and iar kickstart question
  • From: Grant Edwards
• Re: USB Bulk transfers, General questions
  • From: Steve Calfee
• Re: msp430: mspgcc tool chain and iar kickstart question
  • From: Grant Edwards
• Re: Chipcon/8051 sanity check
  • From: Mike Silva
• Re: USB Bulk transfers, General questions
  • From: linnix
• Re: msp430 jtag: does usb = parallel + par-to-usb cable?
  • From: 4MLA1FN
• msp430: mspgcc tool chain and iar kickstart question
  • From: 4MLA1FN
• Re: msp430 jtag: does usb = parallel + par-to-usb cable?
  • From: 4MLA1FN
• Re: Another high end 16/32 bit uC, Wide Vcc, Wide Temp
  • From: Paul Taylor
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Marius . Hancu
• Microblaze OPB SDRAM controller and uClinux
  • From: Wisnia
• Re: So what is the difference between a software engineer and computer scientist?
  • From: Didi
• Re: Splitting a serial (RS232) port signal?
  • From: Ulf Samuelsson
• Re: msp430 jtag: does usb = parallel + par-to-usb cable?
  • From: larwe
• Re: What is the simplest CPU GCC is ported for?
  • From: Colin Paul Gloster
• Re: Chipcon/8051 sanity check
  • From: FreeRTOS.org
• Re: Chipcon/8051 sanity check
  • From: Ian Bell
• Re: So what is the difference between a software engineer and computer scientist?
  • From: Tom Lucas
• Re: Initializations in assembly or C : which is favourable ? why ?
  • From: Tom Lucas
• Re: Chipcon/8051 sanity check
  • From: FreeRTOS.org
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: mats . m
• Re: msp430 jtag: does usb = parallel + par-to-usb cable?
  • From: Don McKenzie
• Re: New verification tool for IPcore [Aldec & Actel]
  • From: TASK
• Re: Experiences with FreeRTOS?
  • From: David Brown
• Another high end 16/32 bit uC, Wide Vcc, Wide Temp
  • From: Jim Granville
• Re: msp430 jtag: does usb = parallel + par-to-usb cable?
  • From: 4MLA1FN
• msp430 jtag: does usb = parallel + par-to-usb cable?
  • From: 4MLA1FN
• USB Bulk transfers, General questions
  • From: prune
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Marius . Hancu
• Re: Experiences with FreeRTOS?
  • From: Grant Edwards
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Marius . Hancu
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Marius . Hancu
• Re: So what is the difference between a software engineer and computer scientist?
  • From: Jim Thompson
• Re: Implementing critical sections on AVR 8 bit processors
  • From: CBFalconer
• Re: MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Joerg
• Re: Measuring the period with MSP430
  • From: Marius . Hancu
• Re: C Coding style question
  • From: Dave Hansen
• Re: Experiences with FreeRTOS?
  • From: Robert Adsett
• Re: Chipcon/8051 sanity check
  • From: Dave Hansen
• Re: Measuring the period with MSP430
  • From: linnix
• Re: Chipcon/8051 sanity check
  • From: FreeRTOS.org
• MSP-FET430UIF, IAR Kickstart: "Failed to initialize device"
  • From: Marius Hancu
• Re: Chipcon/8051 sanity check
  • From: Jim Granville
• Re: What is the simplest CPU GCC is ported for?
  • From: Jim Granville
• Re: Measuring the period with MSP430
  • From: Marius . Hancu
• Re: processo with 4 ethernet ports
  • From: linnix
• Re: Chipcon/8051 sanity check
  • From: FreeRTOS.org
• Re: Implementing critical sections on AVR 8 bit processors
  • From: Ulf Samuelsson
• Re: Chipcon/8051 sanity check
  • From: Ian Bell
• Re: Implementing critical sections on AVR 8 bit processors
  • From: Ulf Samuelsson
• Re: Implementing critical sections on AVR 8 bit processors
  • From: Hans-Bernhard Bröker
• Re: Experiences with FreeRTOS?
  • From: Chris Hills
• Re: limits.h
  • From: Hans-Bernhard Bröker
• Re: C Coding style question
  • From: Steve at fivetrees
• Re: C Coding style question
  • From: Steve at fivetrees
• Re: C Coding style question
  • From: Grant Edwards
• Re: Platform dependency. was: C Coding style question
  • From: Hans-Bernhard Bröker
• Re: processo with 4 ethernet ports
  • From: Grant Edwards
• Chipcon/8051 sanity check
  • From: FreeRTOS.org
• Re: C Coding style question
  • From: andrew queisser
• Re: C Coding style question
  • From: Jonathan Kirwan
• Re: Any experience/comments for STR9 Com Stick?
  • From: larwe
• Re: processo with 4 ethernet ports
  • From: Sergey Kubushin
• Re: Is it possible to put 2 ethernet phys back to back ?
  • From: Anton Erasmus
• Re: Measuring the period with MSP430
  • From: CBFalconer
• Re: Initializations in assembly or C : which is favourable ? why ?
  • From: CBFalconer
• Re: Any experience/comments for STR9 Com Stick?
  • From: janka vietzen
• Re: processo with 4 ethernet ports
  • From: cs_posting
• How to compile Cypress Vendax using Keil?
  • From: SWDeveloper
• processo with 4 ethernet ports
  • From: AK
• Re: What is the simplest CPU GCC is ported for?
  • From: Steve Calfee
• Re: Any experience/comments for STR9 Com Stick?
  • From: larwe
• Re: What is the simplest CPU GCC is ported for?
  • From: Steve Calfee
• Re: What is the simplest CPU GCC is ported for?
  • From: Steve Calfee
• Any experience/comments for STR9 Com Stick?
  • From: janka vietzen
• Re: Regarding Dual core processors
  • From: Robert Kaiser
• Re: GSM/GPRS emdedde module
  • From: Maciej Sawicki
• Re: C Coding style question
  • From: Stefan Reuther
• Low cost Embedded Linux Board
  • From: Andrea
• Re: Implementing critical sections on AVR 8 bit processors
  • From: Terran Melconian
• Re: Cost analysis for Embedded Linux?
  • From: Philippe
• Re: Implementing critical sections on AVR 8 bit processors
  • From: CBFalconer
• Re: C Coding style question
  • From: CBFalconer
• Re: C Coding style question
  • From: Ignacio G.T.
• Re: Is it possible to put 2 ethernet phys back to back ?
  • From: Ken Asbury
• Re: New verification tool for IPcore [Aldec & Actel]
  • From: linnix
• Re: Implementing critical sections on AVR 8 bit processors
  • From: the el vez
• Is it possible to put 2 ethernet phys back to back ?
  • From: Anton Erasmus
• Re: Cost analysis for Embedded Linux?
  • From: Mark Borgerson
• Re: Initializations in assembly or C : which is favourable ? why ?
  • From: Vladimir Vassilevsky
• Re: Measuring the period with MSP430
  • From: Grant Edwards
• Re: Initializations in assembly or C : which is favourable ? why ?
  • From: Grant Edwards
• New verification tool for IPcore [Aldec & Actel]
  • From: TASK
• Re: HC12 (+ Ethernet) development kit ?
  • From: cs_posting
• Re: What is the simplest CPU GCC is ported for?
  • From: cs_posting
• Re: Measuring the period with MSP430
  • From: larwe
• Measuring the period with MSP430
  • From: Marius Hancu
• Re: Initializations in assembly or C : which is favourable ? why ?
  • From: David Brown
• Re: What is the simplest CPU GCC is ported for?
  • From: Pete Fenelon
• Re: C Coding style question
  • From: Pete Fenelon
• Re: Cost analysis for Embedded Linux?
  • From: a_simple_code
• Re: What is the simplest CPU GCC is ported for?
  • From: HT-Lab
• Re: What is the simplest CPU GCC is ported for?
  • From: Colin Paul Gloster
• Re: Initializations in assembly or C : which is favourable ? why ?
  • From: Joe G \(Home\)
• Re: C Coding style question
  • From: Ignacio G.T.
• Re: Initializations in assembly or C : which is favourable ? why ?
  • From: Tom Lucas
• Re: Initializations in assembly or C : which is favourable ? why ?
  • From: Paul Burke
• Re: What is the simplest CPU GCC is ported for?
  • From: David Brown
• Re: Cheap one way RF solution
  • From: David Brown
• Re: Initializations in assembly or C : which is favourable ? why ?
  • From: werty
• Re: GSM/GPRS emdedde module
  • From: Zara
• Initializations in assembly or C : which is favourable ? why ?
  • From: techie.embedded@xxxxxxxxx
• Re: limits.h
  • From: Arlet
• Re: Implementing critical sections on AVR 8 bit processors
  • From: Terran Melconian
• Regarding Dual core processors
  • From: ssubbarayan
• Implementing critical sections on AVR 8 bit processors
  • From: the el vez
• limits.h
  • From: Vladimir Vassilevsky
• Re: Cost analysis for Embedded Linux?
  • From: CBFalconer
• Re: C Coding style question
  • From: CBFalconer
• Re: What is the simplest CPU GCC is ported for?
  • From: toby
• Re: TMS470
  • From: Alex Gibson
• Re: C Coding style question
  • From: Steve at fivetrees
• Re: What is the simplest CPU GCC is ported for?
  • From: Steve Calfee
• Re: What is the simplest CPU GCC is ported for?
  • From: Steve Calfee
• Re: C Coding style question
  • From: Stefan Reuther
• Re: Cost analysis for Embedded Linux?
  • From: Chris Hills
• Re: C Coding style question
  • From: Jonathan Kirwan
• Re: C Coding style question
  • From: Jonathan Kirwan
• Re: C Coding style question
  • From: Steve at fivetrees
• Re: What is the simplest CPU GCC is ported for?
  • From: Grant Edwards
• Re: Cost analysis for Embedded Linux?
  • From: AK
• Re: Cost analysis for Embedded Linux?
  • From: FreeRTOS.org
• Re: Cost analysis for Embedded Linux?
  • From: D.
• Re: Cost analysis for Embedded Linux?
  • From: Rene Tschaggelar
• Re: CF+ modes confusion
  • From: larwe
• Re: Cost analysis for Embedded Linux?
  • From: a_simple_code
• Re: Cost analysis for Embedded Linux?
  • From: linnix
• Re: Cost analysis for Embedded Linux?
  • From: a_simple_code
• Re: Experiences with FreeRTOS?
  • From: Guy Macon
• Re: CF+ modes confusion
  • From: linnix
• Re: Cost analysis for Embedded Linux?
  • From: Philippe
• Re: C Coding style question
  • From: Vladimir Vassilevsky
• Re: V Cut for multiple layers PCB
  • From: Spehro Pefhany
• Re: Cost analysis for Embedded Linux?
  • From: a_simple_code
• Re: V Cut for multiple layers PCB
  • From: larwe
• Re: Cost analysis for Embedded Linux?
  • From: Dan N
• Cost analysis for Embedded Linux?
  • From: a_simple_code
• Re: TMS470
  • From: Donald
• CF+ modes confusion
  • From: harshitkhaitan
• Re: C Coding style question
  • From: Steve at fivetrees
• Platform dependency. was: C Coding style question
  • From: The Real Andy
• Re: V Cut for multiple layers PCB
  • From: Alf Katz
• Re: HC12 (+ Ethernet) development kit ?
  • From: Oliver Betz
• Re: V Cut for multiple layers PCB
  • From: PeteS
• Re: TMS470
  • From: Alex Gibson
• Re: V Cut for multiple layers PCB
  • From: Spehro Pefhany
• Re: V Cut for multiple layers PCB
  • From: CBFalconer
• Re: V Cut for multiple layers PCB
  • From: larwe
• V Cut for multiple layers PCB
  • From: kunil
• Re: Cheap one way RF solution
  • From: Dave
• Re: C Coding style question
  • From: Vladimir Vassilevsky
• Re: What is the simplest CPU GCC is ported for?
  • From: larwe
• Re: Question regarding SPI (Serial Peripheral Interface)
  • From: Raban
• Re: What is the simplest CPU GCC is ported for?
  • From: larwe
• Re: What is the simplest CPU GCC is ported for?
  • From: Tim Wescott
• Re: Cheap one way RF solution
  • From: Vladimir Vassilevsky
• Re: C Coding style question
  • From: CBFalconer
• Re: C Coding style question
  • From: Vladimir Vassilevsky
• Re: C Coding style question
  • From: Chris Hills
• Re: C Coding style question
  • From: Chris Hills
• Re: C Coding style question
  • From: Chris Hills
• Re: C Coding style question
  • From: cs_posting
• Re: HC12 (+ Ethernet) development kit ?
  • From: cs_posting
• Re: HC12 (+ Ethernet) development kit ?
  • From: Oliver Betz
• Re: HCS12 microcontroller question
  • From: Michael A. Terrell
• Re: C Coding style question
  • From: Neil
• Re: Cheap one way RF solution
  • From: Paul Keinanen
• Re: What is the simplest CPU GCC is ported for?
  • From: cs_posting
• Re: TMS320F2812 Floating point vs fixed point speed?
  • From: steve
• Re: Splitting a serial (RS232) port signal?
  • From: ElderUberGeek
• Re: What is the simplest CPU GCC is ported for?
  • From: Steve Calfee
• Re: MSP430 Flash Emulation Tool: problems with connection via parallel port
  • From: mmihai
• Re: What is the simplest CPU GCC is ported for?
  • From: Steve Calfee
• Re: What is the simplest CPU GCC is ported for?
  • From: mmihai
• Re: What is the simplest CPU GCC is ported for?
  • From: larwe
• What is the simplest CPU GCC is ported for?
  • From: Steve Calfee
• History of embedded operating systems
  • From: UnderMine
• Re: Is it possible to config GPIO pins in LPC21XX ARM to be in/out?
  • From: jetq88
• Re: TMS320F2812 Floating point vs fixed point speed?
  • From: CBFalconer
• Re: Splitting a serial (RS232) port signal?
  • From: Jonathan Kirwan
• Re: Splitting a serial (RS232) port signal?
  • From: Jonathan Kirwan
• Re: Splitting a serial (RS232) port signal?
  • From: Jonathan Kirwan
• Re: Splitting a serial (RS232) port signal?
  • From: Jonathan Kirwan
• Re: Splitting a serial (RS232) port signal?
  • From: Mark Walsh
• Re: Splitting a serial (RS232) port signal?
  • From: jetq88
• Re: DS89C450 serial problem
  • From: Meindert Sprang
• Re: Serial to ethernet?
  • From: Dave
• Re: Splitting a serial (RS232) port signal?
  • From: andrew queisser
• Re: DS89C450 serial problem
  • From: Jim Granville
• TMS320F2812 Floating point vs fixed point speed?
  • From: cman
• Re: Is it possible to config GPIO pins in LPC21XX ARM to be in/out?
  • From: CBFalconer
• Re: Splitting a serial (RS232) port signal?
  • From: Don McKenzie
• Re: Is it possible to config GPIO pins in LPC21XX ARM to be in/out?
  • From: CBFalconer
• Re: Splitting a serial (RS232) port signal?
  • From: Jim Stewart
• Re: Cheap one way RF solution
  • From: larwe
• Re: Cheap one way RF solution
  • From: Tauno Voipio
• Re: C Coding style question
  • From: andrew queisser
• GSM/GPRS emdedde module
  • From: rmalerba@xxxxxxxxx
• Re: Is it possible to config GPIO pins in LPC21XX ARM to be in/out?
  • From: Robert Adsett
• Re: DS89C450 serial problem
  • From: linnix
• Re: DS89C450 serial problem
  • From: Meindert Sprang
• Re: C Coding style question
  • From: Pete Fenelon
• Re: Is it possible to config GPIO pins in LPC21XX ARM to be in/out?
  • From: Peter Dickerson
• Re: DS89C450 serial problem
  • From: linnix
• Splitting a serial (RS232) port signal?
  • From: ElderUberGeek
• Re: Cheap one way RF solution
  • From: Meindert Sprang
• Re: Is it possible to config GPIO pins in LPC21XX ARM to be in/out?
  • From: Robert Adsett
• Re: Is it possible to config GPIO pins in LPC21XX ARM to be in/out?
  • From: Stephen Pelc
• Re: Is it possible to config GPIO pins in LPC21XX ARM to be in/out?
  • From: Mike Silva
• Re: Is it possible to config GPIO pins in LPC21XX ARM to be in/out?
  • From: Arlet
• Re: Is it possible to config GPIO pins in LPC21XX ARM to be in/out?
  • From: jetq88
• Re: Is it possible to config GPIO pins in LPC21XX ARM to be in/out?
  • From: jetq88
• Re: M16C tool-chain: IAR Embedded Workbench or Renesas NC30?
  • From: Peter Dickerson
• Re: M16C tool-chain: IAR Embedded Workbench or Renesas NC30?
  • From: DJ Delorie
• Re: Cheap one way RF solution
  • From: Tom
• Re: M16C tool-chain: IAR Embedded Workbench or Renesas NC30?
  • From: Guillaume Chevillot
• Re: Cheap one way RF solution
  • From: David Brown
• Re: Cheap one way RF solution
  • From: larwe
• Re: Is it possible to config GPIO pins in LPC21XX ARM to be in/out?
  • From: Joe G \(Home\)
• Re: DS89C450 serial problem
  • From: Ed
• Re: C Coding style question
  • From: Michael N. Moran
• Re: SPI : Freescale vs Microchip compatibility ?
  • From: Rene Tschaggelar
• Re: M16C tool-chain: IAR Embedded Workbench or Renesas NC30?
  • From: Peter Dickerson
• Re: M16C tool-chain: IAR Embedded Workbench or Renesas NC30?
  • From: Ignacio G.T.
• Re: M16C tool-chain: IAR Embedded Workbench or Renesas NC30?
  • From: Ignacio G.T.
• Re: Cheap one way RF solution
  • From: skr
• Re: DS89C450 serial problem
  • From: Schjaer
• Re: C Coding style question
  • From: Paul Taylor
• Re: C Coding style question
  • From: Jonathan Kirwan
• Re: DS89C450 serial problem
  • From: Jim Granville
• Re: DS89C450 serial problem
  • From: Kris Peeters
• Is it possible to config GPIO pins in LPC21XX ARM to be in/out?
  • From: jetq88
• Re: C Coding style question
  • From: andrew queisser
• Re: C Coding style question
  • From: andrew queisser
• DS89C450 serial problem
  • From: Ed
• Re: Cheap one way RF solution
  • From: larwe
• Re: MSP430 Flash Emulation Tool: problems with connection via parallel port
  • From: Gene S . Berkowitz
• Re: Looking for applications
  • From: Vladimir Vassilevsky
• Looking for applications
  • From: Christian Christmann
• Re: SPI : Freescale vs Microchip compatibility ?
  • From: waldini
• Re: Cheap one way RF solution
  • From: Rohan
• Re: Cheap one way RF solution
  • From: David Brown
• Re: Freescale vs Microchip compatibility ?
  • From: Mr . C
• Re: C Coding style question
  • From: David Brown
• Re: C Coding style question
  • From: David Brown
• Re: Cheap one way RF solution
  • From: larwe
• Re: Cheap one way RF solution
  • From: David Brown
• dc motor inducing noise on a2d signals
  • From: seegoon
• Re: PIC vs ARM assembler (no flamewar please)
  • From: David Brown
• Re: Re : Tasking Compiler v8.6
  • From: Peter Dickerson
• Re: C Coding style question
  • From: Paul Taylor
• Re: C Coding style question
  • From: Paul Taylor
• Re: Serial to ethernet?
  • From: Meindert Sprang
• Re: Re : Tasking Compiler v8.6
  • From: wombat001
• Re: Serial to ethernet?
  • From: Dave
• Re: What does "embedded firmware" really mean?
  • From: BubbaGump
• Re: C Coding style question
  • From: Robert Adsett
• Re: C Coding style question
  • From: Dave Hansen
• Re: HC12 (+ Ethernet) development kit ?
  • From: David Kelly
• Re: FAQ
  • From: Michael R. Kesti
• Re: C Coding style question
  • From: andrew queisser
• Re: C Coding style question
  • From: andrew queisser
• Re: C Coding style question
  • From: andrew queisser
• Re: FAQ
  • From: Hans-Bernhard Bröker
• Re: C Coding style question
  • From: Hans-Bernhard Bröker
• Re: C Coding style question
  • From: Hans-Bernhard Bröker
• Re: C Coding style question
  • From: Mark Borgerson
• Re: C Coding style question
  • From: Mark Borgerson
• Re: HC12 (+ Ethernet) development kit ?
  • From: Frank-Christian Kruegel
• Re: C Coding style question
  • From: andrew queisser
• Re: C Coding style question
  • From: Paul Carpenter
• Re: C Coding style question
  • From: Robert Adsett
• Re: C Coding style question
  • From: Grant Edwards
• Re: C Coding style question
  • From: andrew queisser
• Re: C Coding style question
  • From: andrew queisser
• Re: C Coding style question
  • From: Tom Lucas
• Re: C Coding style question
  • From: Grant Edwards
• Re: C Coding style question
  • From: Robert Adsett
• Re: C Coding style question
  • From: Grant Edwards
• Re: C Coding style question
  • From: Tom Lucas
• Re: C Coding style question
  • From: Vladimir Vassilevsky
• Re: M16C tool-chain: IAR Embedded Workbench or Renesas NC30?
  • From: Peter Dickerson
• Re: C Coding style question
  • From: Dave Hansen
• Re: C Coding style question
  • From: CBFalconer
• LVDS panel install
  • From: ckarnacki
• Re: C Coding style question
  • From: Grant Edwards
• Re: C Coding style question
  • From: Mark Borgerson
• Re: M16C tool-chain: IAR Embedded Workbench or Renesas NC30?
  • From: DJ Delorie
• Re: C Coding style question
  • From: Grant Edwards
• Re: C Coding style question
  • From: Vladimir Vassilevsky
• M16C tool-chain: IAR Embedded Workbench or Renesas NC30?
  • From: Ignacio G.T.
• Re: Freescale vs Microchip compatibility ?
  • From: Anthony Fremont
• Re: C Coding style question
  • From: Robert Adsett
• Re: C Coding style question
  • From: Vladimir Vassilevsky
• Re: Freescale vs Microchip compatibility ?
  • From: Spehro Pefhany
• Re: SPI : Freescale vs Microchip compatibility ?
  • From: Guillaume Chevillot
• Re: Freescale vs Microchip compatibility ?
  • From: Anthony Fremont
• SPI : Freescale vs Microchip compatibility ?
  • From: 5 . d
• SMART'07 publications available on-line
  • From: Grigori Fursin
• Re: HC12 (+ Ethernet) development kit ?
  • From: 5 . d
• Re: AT91SAM9260 RTOS
  • From: 42Bastian Schick
• Re: AT91SAM9260 RTOS
  • From: 42Bastian Schick
• Re: Question regarding SPI (Serial Peripheral Interface)
  • From: david . industronics
• Iterative Interactive Compiler
  • From: Grigori Fursin
• Re: C Coding style question
  • From: Tom Lucas
• Re: Its NOT rocket science , only computers ..
  • From: Ian Bell
• Re: Re : Tasking Compiler v8.6
  • From: Jack Klein
• Re: Question regarding SPI (Serial Peripheral Interface)
  • From: Neil
• Re: C Coding style question
  • From: Neil
• Re : Tasking Compiler v8.6
  • From: wombat001
• Re: C Coding style question
  • From: Neil
• Re: C Coding style question
  • From: nospam
• Re: FAQ
  • From: Grant Edwards
• Re: FAQ
  • From: Michael R. Kesti
• Re: Question regarding SPI (Serial Peripheral Interface)
  • From: slebetman@xxxxxxxxx
• Re: C Coding style question
  • From: CBFalconer
• Re: Question regarding SPI (Serial Peripheral Interface)
  • From: Mike Silva
• Re: C Coding style question
  • From: andrew queisser
• Re: Question regarding SPI (Serial Peripheral Interface)
  • From: Raban
• Re: C Coding style question
  • From: Mark McDougall
• Philips 1161 Controller and Bulk Transfers
  • From: prune
• Re: C Coding style question
  • From: Mark Borgerson
• Re: C Coding style question
  • From: Vladimir Vassilevsky
• Re: C Coding style question
  • From: Vladimir Vassilevsky
• Re: What does "embedded firmware" really mean?
  • From: BubbaGump
• Re: C Coding style question
  • From: Grant Edwards
• Re: C Coding style question
  • From: Vladimir Vassilevsky
• Re: C Coding style question
  • From: Vladimir Vassilevsky
• Re: C Coding style question
  • From: Vladimir Vassilevsky
• Re: Protecting I/Os
  • From: Paul E. Bennett
• Re: C Coding style question
  • From: Jack Klein
• Re: C Coding style question
  • From: Jack Klein
• Re: C Coding style question
  • From: Pete Fenelon
• Re: C Coding style question
  • From: Pete Fenelon
• Re: C Coding style question
  • From: andrew queisser
• Re: C Coding style question
  • From: Paul Carpenter
• Re: C Coding style question
  • From: CBFalconer
• Re: C Coding style question
  • From: CBFalconer
• Re: Question regarding SPI (Serial Peripheral Interface)
  • From: Vladimir Vassilevsky
• Re: FAQ
  • From: CBFalconer
• Re: Question regarding SPI (Serial Peripheral Interface)
  • From: Tim Wescott
• Re: C Coding style question
  • From: Al Balmer
• Re: C Coding style question
  • From: James Beck
• Question regarding SPI (Serial Peripheral Interface)
  • From: Raban
• Re: C Coding style question
  • From: Vladimir Vassilevsky
• Re: C Coding style question
  • From: Jyrki Holopainen
• Re: C Coding style question
  • From: James Beck
• Re: FAQ
  • From: Michael R. Kesti
• Re: C Coding style question
  • From: Vladimir Vassilevsky
• Re: C Coding style question
  • From: andrew queisser
• Re: C Coding style question
  • From: andrew queisser
• Its NOT rocket science , only computers ..
  • From: werty
• Re: C Coding style question
  • From: Tauno Voipio
• C Coding style question
  • From: andrew queisser
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Wilco Dijkstra
• Re: C Coding style question
  • From: FreeRTOS.org
• Re: Protecting I/Os
  • From: A.D.
• Re: C Coding style question
  • From: Grant Edwards
• Re: C Coding style question
  • From: Tom Lucas
• Re: C Coding style question
  • From: Vladimir Vassilevsky
• Re: C Coding style question
  • From: Tauno Voipio
• Re: HC12 (+ Ethernet) development kit ?
  • From: Eric
• Re: C Coding style question
  • From: Grant Edwards
• Re: C Coding style question
  • From: Vladimir Vassilevsky
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Everett M. Greene
• FAQ
  • From: werty
• Re: HC12 (+ Ethernet) development kit ?
  • From: Vladimir Vassilevsky
• Re: What does "embedded firmware" really mean?
  • From: larwe
• Re: What does "embedded firmware" really mean?
  • From: BubbaGump
• Re: Serial to ethernet?
  • From: Anton Erasmus
• Re: PIC vs ARM assembler (no flamewar please)
  • From: David Brown
• Re: Protecting I/Os
  • From: DJ Delorie
• Re: HC12 (+ Ethernet) development kit ?
  • From: Dave Rooney
• HC12 (+ Ethernet) development kit ?
  • From: 5 . d
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Wilco Dijkstra
• Re: Protecting I/Os
  • From: Stef
• Re: A very good website for VLSI chip designers
  • From: CBFalconer
• Re: Protecting I/Os
  • From: CBFalconer
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Paul Keinanen
• Re: GNU make on Windows [was Re: Codewarrior vs. Cosmic C for Freescale 9S08]
  • From: David Brown
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Wilco Dijkstra
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Wilco Dijkstra
• Re: PIC vs ARM assembler (no flamewar please)
  • From: David Brown
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Wilco Dijkstra
• Re: Protecting I/Os
  • From: martin griffith
• A very good website for VLSI chip designers
  • From: chipdesignart
• Protecting I/Os
  • From: A.D.
• Re: SD card interface
  • From: Donald
• Resumes CV's / Positive vs. Negative Thinking Free Informational Site
  • From: rawebadvert
• Re: Just when you thought OTP was a thing of the past :
  • From: Jonathan Kirwan
• Re: SD card interface
  • From: robertwessel2@xxxxxxxxx
• Re: Just when you thought OTP was a thing of the past :
  • From: Jim Stewart
• Just when you thought OTP was a thing of the past :
  • From: Jim Granville
• Re: DACs
  • From: PhilW
• Re: DACs
  • From: PhilW
• Re: GNU make on Windows
  • From: Stefan Reuther
• Re: GNU make on Windows [was Re: Codewarrior vs. Cosmic C for Freescale 9S08]
  • From: Clifford Heath
• Re: MSP430 Flash Emulation Tool: problems with connection via parallel port
  • From: Marius . Hancu
• Re: Headhunter interview process?
  • From: Hans-Bernhard Bröker
• Re: MSP430 Flash Emulation Tool: problems with connection via parallel port
  • From: Marius . Hancu
• Re: SD card interface
  • From: torgil@xxxxxxxxxx
• Re: Headhunter interview process?
  • From: Ed Prochak
• Re: MSP430 Flash Emulation Tool: problems with connection via parallel port
  • From: Marius . Hancu
• Re: Safety Critical ARM
  • From: linnix
• Re: Safety Critical ARM
  • From: Tom Lucas
• Re: AVR butterfly - issue with serial loading
  • From: larwe
• Re: Safety Critical ARM
  • From: Not Really Me
• Re: AVR butterfly - issue with serial loading
  • From: scott . manton
• Re: Serial to ethernet?
  • From: Meindert Sprang
• Serial to ethernet?
  • From: Ed
• Re: DACs
  • From: m
• Re: DACs
  • From: Peter Jakacki
• Re: Safety Critical ARM
  • From: Tom Lucas
• Re: Safety Critical ARM
  • From: Tom Lucas
• Re: IT IS MIRACLE
  • From: Bill Davy
• Re: IT IS MIRACLE
  • From: Pete Fenelon
• Re: GNU make on Windows [was Re: Codewarrior vs. Cosmic C for Freescale 9S08]
  • From: Paul Gotch
• Re: RSA on 8bit micro
  • From: tum_
• Re: New microprocessor architecture
  • From: Rene Tschaggelar
• Re: MSP430 Flash Emulation Tool: problems with connection via parallel port
  • From: mats . m
• Re: Headhunter interview process?
  • From: invalid
• Re: Cheap one way RF solution
  • From: skr
• Re: Safety Critical ARM
  • From: Chris Hills
• Re: Safety Critical ARM
  • From: Chris Hills
• Re: Headhunter interview process?
  • From: Ian Bell
• Re: Headhunter interview process?
  • From: Ian Bell
• Re: GNU make on Windows [was Re: Codewarrior vs. Cosmic C for Freescale 9S08]
  • From: Paul Keinanen
• Re: GNU make on Windows [was Re: Codewarrior vs. Cosmic C for Freescale 9S08]
  • From: Paul Keinanen
• IT IS MIRACLE
  • From: mercy of Islam
• Re: DACs
  • From: m
• Re: DACs
  • From: m
• Re: Headhunter interview process?
  • From: BubbaGump
• Re: DACs
  • From: Jim Granville
• Re: DACs
  • From: PhilW
• Re: GNU make on Windows [was Re: Codewarrior vs. Cosmic C for Freescale 9S08]
  • From: Clifford Heath
• Re: DACs
  • From: Vladimir Vassilevsky
• Re: DACs
  • From: m
• Re: DACs
  • From: m
• Re: GNU make on Windows [was Re: Codewarrior vs. Cosmic C for Freescale 9S08]
  • From: Paul Gotch
• Re: Headhunter interview process?
  • From: BubbaGump
• Re: GNU make on Windows [was Re: Codewarrior vs. Cosmic C for Freescale 9S08]
  • From: Clifford Heath
• Re: DACs
  • From: Jim Granville
• Re: GNU make on Windows [was Re: Codewarrior vs. Cosmic C for Freescale 9S08]
  • From: Hans-Bernhard Bröker
• Re: GNU make on Windows [was Re: Codewarrior vs. Cosmic C for Freescale 9S08]
  • From: Hans-Bernhard Bröker
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Everett M. Greene
• Re: DACs
  • From: Vladimir Vassilevsky
• Re: DACs
  • From: Jim Granville
• Re: DACs
  • From: m
• Re: DACs
  • From: m
• Re: DACs
  • From: m
• Re: DACs
  • From: Jim Granville
• Re: SD card interface
  • From: Brendan Gillatt
• Re: alldatasheet.com no longer works on Netscape 7.2
  • From: larwe
• Re: Safety Critical ARM
  • From: Robert . NXP
• alldatasheet.com no longer works on Netscape 7.2
  • From: msg
• Re: DACs
  • From: m
• Re: Cheap one way RF solution
  • From: msg
• Re: DACs
  • From: Jim Granville
• Re: GNU make on Windows [was Re: Codewarrior vs. Cosmic C for Freescale 9S08]
  • From: David Kelly
• Re: GNU make on Windows [was Re: Codewarrior vs. Cosmic C for Freescale 9S08]
  • From: Oliver Betz
• Re: Cheap one way RF solution
  • From: Wim Ton
• National's Phyter as Ethernet phy: experience?
  • From: zigbee
• Problem building a ROM resident image
  • From: dchou4u
• Re: MSP430 Flash Emulation Tool: problems with connection via parallel port
  • From: Gene S . Berkowitz
• GNU make on Windows [was Re: Codewarrior vs. Cosmic C for Freescale 9S08]
  • From: Hans-Bernhard Bröker
• Re: RSA on 8bit micro
  • From: ortegaalfredo
• Re: Cheap one way RF solution
  • From: Rohan
• Re: Cheap one way RF solution
  • From: Rohan
• Call for papers on Hardware Architectures for Genetic, Neural and Fuzzy Systems
  • From: Nadia
• Re: Cheap one way RF solution
  • From: Leon
• Re: Codewarrior vs. Cosmic C for Freescale 9S08
  • From: Oliver Betz
• Re: Troubleshooting embedded controllers boards
  • From: Hugh
• SD card interface
  • From: torgil@xxxxxxxxxx
• Re: DACs
  • From: Paul Keinanen
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Paul Keinanen
• Cheap one way RF solution
  • From: Rohan
• DACs
  • From: m
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Grant Edwards
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Grant Edwards
• Re: Headhunter interview process?
  • From: BubbaGump
• Re: What does "embedded firmware" really mean?
  • From: Dave
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Robert Adsett
• Re: Safety Critical ARM
  • From: Paul Gotch
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Wilco Dijkstra
• What does "embedded firmware" really mean?
  • From: BubbaGump
• Re: SD Card driving recipe desperately needed / SanDisk problems
  • From: lp987
• Re: Safety Critical ARM
  • From: Chris Hills
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Grant Edwards
• Re: Headhunter interview process?
  • From: Grant Edwards
• Re: Headhunter interview process?
  • From: BubbaGump
• Re: Troubleshooting embedded controllers boards
  • From: Chris_99
• Re: MSP430 Flash Emulation Tool: problems with connection via parallel port
  • From: Marius . Hancu
• Re: Experiences with FreeRTOS?
  • From: FreeRTOS.org
• Re: MSP430 Flash Emulation Tool: problems with connection via parallel port
  • From: Marius . Hancu
• Re: Experiences with FreeRTOS?
  • From: Fabio G .
• MSP430 Flash Emulation Tool: problems with connection via parallel port
  • From: Marius Hancu
• Re: Codewarrior vs. Cosmic C for Freescale 9S08
  • From: Anton Erasmus
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Grant Edwards
• Re: Troubleshooting embedded controllers boards
  • From: Grant Edwards
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Robert Adsett
• Re: Headhunter interview process?
  • From: Ace0f_5pades
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Wilco Dijkstra
• Re: Troubleshooting embedded controllers boards
  • From: Paul Carpenter
• Re: Hex format reading from a file
  • From: andrew queisser
• Re: Headhunter interview process?
  • From: Robert Adsett
• Re: Codewarrior vs. Cosmic C for Freescale 9S08
  • From: Robert Adsett
• Re: Hex format reading from a file
  • From: andrew queisser
• Re: Hex format reading from a file
  • From: Arlet
• Re: Troubleshooting embedded controllers boards
  • From: uriah
• Re: Troubleshooting embedded controllers boards
  • From: uriah
• Re: Headhunter interview process?
  • From: Grant Edwards
• Re: Safety Critical ARM
  • From: Paul Gotch
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Robert Adsett
• Re: Headhunter interview process?
  • From: BubbaGump
• Re: Problem with Dallas 80C390
  • From: Hans-Bernhard Bröker
• Re: Safety Critical ARM
  • From: Paul E. Bennett
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Wilco Dijkstra
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Wilco Dijkstra
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Grant Edwards
• Re: Headhunter interview process?
  • From: Grant Edwards
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Everett M. Greene
• Re: Headhunter interview process?
  • From: BubbaGump
• Re: Headhunter interview process?
  • From: Ed Prochak
• Re: Headhunter interview process?
  • From: BubbaGump
• Re: Headhunter interview process?
  • From: BubbaGump
• Re: Headhunter interview process?
  • From: BubbaGump
• Re: Headhunter interview process?
  • From: Grant Edwards
• Re: Headhunter interview process?
  • From: Tom Lucas
• Headhunter interview process?
  • From: BubbaGump
• Safety Critical ARM
  • From: Tom Lucas
• Re: AVR butterfly - issue with serial loading
  • From: steve
• Re: Hex format reading from a file
  • From: cs_posting
• AVR butterfly - issue with serial loading
  • From: scott . manton
• Re: Hex format reading from a file
  • From: Not Really Me
• Re: Troubleshooting embedded controllers boards
  • From: Grant Edwards
• Re: Codewarrior vs. Cosmic C for Freescale 9S08
  • From: James Beck
• Re: 74LVT transition times: How low can you go?
  • From: Paul Taylor
• Re: Codewarrior vs. Cosmic C for Freescale 9S08
  • From: Mr . C
• Re: PIC vs ARM assembler (no flamewar please)
  • From: rickman
• Re: Troubleshooting embedded controllers boards
  • From: larwe
• Re: Troubleshooting embedded controllers boards
  • From: Paul Carpenter
• Re: Codewarrior vs. Cosmic C for Freescale 9S08
  • From: Pete Fenelon
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Deep Reset
• Re: Troubleshooting embedded controllers boards
  • From: Hugh
• Re: Troubleshooting embedded controllers boards
  • From: Tom Lucas
• Re: Experiences with FreeRTOS?
  • From: David Brown
• Re: Troubleshooting embedded controllers boards
  • From: Paul Burke
• Re: Experiences with FreeRTOS?
  • From: David Brown
• Re: Experiences with FreeRTOS?
  • From: David Brown
• Problem with Dallas 80C390
  • From: hitsx@xxxxxxxxxx
• Troubleshooting embedded controllers boards
  • From: uriah
• Re: dsPic questions
  • From: FreeRTOS.org
• dsPic questions
  • From: mmormota
• Re: Codewarrior vs. Cosmic C for Freescale 9S08
  • From: CBFalconer
• Re: Embedded Noob question: Netburner MOD5213/MOD5270 dev kits?
  • From: msg
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Robert Adsett
• Re: Embedded Noob question: Netburner MOD5213/MOD5270 dev kits?
  • From: Eric
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Wilco Dijkstra
• Re: Codewarrior vs. Cosmic C for Freescale 9S08
  • From: Robert Adsett
• Re: Experiences with FreeRTOS?
  • From: Robert Adsett
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Grant Edwards
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Wilco Dijkstra
• Re: RS-232 ports: buy two, get one free! ;)
  • From: David H. Barr
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Everett M. Greene
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Wilco Dijkstra
• MII TXER
  • From: Bool
• Re: Headhunter irony
  • From: Ed Prochak
• Re: Hardware Neural Network
  • From: wallge
• ColdFire MCF5474, mcfserial.c, and RTS / CTS flow control.
  • From: Bill
• Re: Embedded Noob question: Netburner MOD5213/MOD5270 dev kits?
  • From: spam
• Re: Licensing
  • From: larwe
• Re: Licensing
  • From: Al Balmer
• Re: Test clip technical specs
  • From: Gunther Mannigel
• Re: Hex format reading from a file
  • From: larwe
• Re: Test clip technical specs
  • From: msg
• Re: Test clip technical specs
  • From: larwe
• Hex format reading from a file
  • From: Chandra
• Re: PIC vs ARM assembler (no flamewar please)
  • From: Wilco Dijkstra
• Re: Experiences with FreeRTOS?
  • From: Paul Keinanen
• Re: Codewarrior vs. Cosmic C for Freescale 9S08
  • From: Mr . C
• Re: Experiences with FreeRTOS?
  • From: CBFalconer
• Re: Experiences with FreeRTOS?
  • From: Stef Mientki
• Re: Experiences with FreeRTOS?
  • From: FreeRTOS.org
• Re: Experiences with FreeRTOS?
  • From: Paul Keinanen
• Re: Experiences with FreeRTOS?
  • From: FreeRTOS.org
• Re: Licensing
  • From: larwe
• Re: Experiences with FreeRTOS?
  • From: Guy Macon
• Re: Experiences with FreeRTOS?
  • From: FreeRTOS.org
• Re: Codewarrior vs. Cosmic C for Freescale 9S08
  • From: Pete Fenelon
• Re: Experiences with FreeRTOS?
  • From: Guy Macon
• Re: Academic resume gaps
  • From: Colin Paul Gloster
• Re: Hardware Neural Network
  • From: Daniele
• Re: Experiences with FreeRTOS?
  • From: David Brown
• Re: Hardware Neural Network
  • From: Daniele
• Re: Experiences with FreeRTOS?
  • From: David Brown
• Re: Hardware Neural Network
  • From: Daniele
• Re: Remote Flashing w/ Window Client & OpenOCD
  • From: linnix
• Re: Codewarrior vs. Cosmic C for Freescale 9S08
  • From: Dave Hansen
• Re: Experiences with FreeRTOS?
  • From: TC
• Re: Experiences with FreeRTOS?
  • From: FreeRTOS.org
• Re: PIC vs ARM assembler (no flamewar please)
  • From: CBFalconer