Re: Interest in AVR+MSP430 "general purpose" proto board?

larwe wrote:
- SD socket moved to overhang edge of board by ~80 mil in order to
protrude through edge of 1591ESBK box if desired.

Is the back of this part of the board free, in case you want to
mount the SD socket on the back, rotated 180 degrees, so the SD
card doesn't overlap?

Nice idea, BTW. Would be nice with a CPLD as Jim suggested.
.

Relevant Pages

  • Asus M2400n PCMCIA Card Flash Reader
    ... I am using pcmcia-cs 3.2.7 and i want to mount the PCMCIA Card Flash ... Socket 0: ...
    (comp.os.linux.hardware)
  • Asus M2400n PCMCIA Card Flash Reader
    ... I am using pcmcia-cs 3.2.7 and i want to mount the PCMCIA Card Flash ... Socket 0: ...
    (comp.os.linux.portable)
  • Re: SDS PROM-100 software
    ... 2708 EPROM and to consistently read the content of another used 2708 ... card which worked great with Dave Dunfield's RAMless ROM monitor ... socket) with the IA 1010B the 2708 simulator has been a disaster. ... First the original IA 1010B used a weird and probably damaged 24 pin ...
    (comp.os.cpm)
  • Re: 2.6.0-test9 VFAT problem
    ... and report whatever goes wrong in that case. ... I start the system insert my 64mb Olympus SM into my Belkin SM reader ... mount my 16mb Olympus SM card in my Belkin reader. ... If I try to mount my 64mb card I get 'no media found'. ...
    (Linux-Kernel)
  • Re: Force mount a HD in OS X?
    ... I have a PCI SCI card and an external Hard Drive that will ... SCSI Probe are only available for OS 9 and below. ... Or use the File menu and select 'Mount'. ... CD-RW drive and a few hard drives that work that I have taken ...
    (comp.sys.mac.misc)