Re: msp430 LCD segment pins sharing with I/O Pins

From: Donald <Donald@xxxxxxxxxxxxxxxx>
Date: Thu, 26 Apr 2007 06:23:20 -0600

Rohan wrote:

Hi All,

I am using a MSP430x4xx series controller. I have a doubt regarding
the sharing of the LCD segment pins with I/O pins.

I am using an LCD glass with 30 segments. The LCD controller of the
device gives option of either setting S0-S31 OR S0-S27. Is there a way
of setting S0-S29. This would save me two very valuable I/O pins.

Thanks,
Rohan

References:
- msp430 LCD segment pins sharing with I/O Pins
  - From: Rohan

Prev by Date: msp430 LCD segment pins sharing with I/O Pins
Next by Date: Question about Modbus addressing
Previous by thread: msp430 LCD segment pins sharing with I/O Pins
Next by thread: Selection of a USB microcontroller
Index(es):
- Date
- Thread

Relevant Pages

msp430 LCD segment pins sharing with I/O Pins
... I am using a MSP430x4xx series controller. ... the sharing of the LCD segment pins with I/O pins. ... I am using an LCD glass with 30 segments. ... This would save me two very valuable I/O pins. ...
(comp.arch.embedded)
Re: How to use a 4x20 lcd.
... 4x20 lcd. ... I'm using a zilog mcu and I have enough I/O pins for all the pins of ... Excellent starter guide. ...
(comp.arch.embedded)
How to use a 4x20 lcd.
... 4x20 lcd. ... I can't find any starters's guide for using such device. ... I'm using a zilog mcu and I have enough I/O pins for all the pins of ...
(comp.arch.embedded)