Re: Source for 1.5mm Sockets for Rabbitcore 3000/4000 series ?
- From: luminoso@xxxxxxxxxxxxxx (Luminoso)
- Date: Fri, 27 Apr 2007 18:39:19 GMT
On Thu, 26 Apr 2007 23:33:06 -0400, Robert Adsett
<sub2@xxxxxxxxxxxxxxxxxxxxx> wrote:
In article <4630e26e.26493546@xxxxxxxxxxxxxxxxxxxxxxx>, Luminoso says...
SOMEBODY has to make dual-row 1.5mm SIP sockets with a surface-mount
base for cheap. Somebody ?
Have you checked Samtec?
They've got 1.27mm and 2.0mm ... but no 1.5mm
I've already complained to Rabbit. There's no reason
to use such an obscure connector, except to rip-off
customers for their $15/each items (probably the
"mill-max" brand). Anything below 2mm is almost too
small to hand-solder as well. If nothing else they
ought to arrange the pins in a square to fit a
standard PLCC style socket.
Oh well, I've given up. I've got some RC2000s in
stock and I'll just add a PIC to the board to do
the A/D I need with a serial link back to the bunny.
.
- References:
- Source for 1.5mm Sockets for Rabbitcore 3000/4000 series ?
- From: Luminoso
- Re: Source for 1.5mm Sockets for Rabbitcore 3000/4000 series ?
- From: Robert Adsett
- Source for 1.5mm Sockets for Rabbitcore 3000/4000 series ?
- Prev by Date: Re: Warning -- Off Topic, Job Ad
- Next by Date: Re: Warning -- Off Topic, Job Ad
- Previous by thread: Re: Source for 1.5mm Sockets for Rabbitcore 3000/4000 series ?
- Next by thread: Analyzer of Quality Electrical Energy, with RTOS ( ARM , Driver ADC, lwip , GPRS , Processing data , FFT , Handle of Thread , Real-Time, Socket )
- Index(es):
Relevant Pages
|
