Re: Multi-processor breadboard: CAD files are up

On Apr 29, 3:08 pm, larwe <zwsdot...@xxxxxxxxx> wrote:
For anyone who's interested, I've published the editable schematic and
PCB files for the AVR/MSP430/Cygnal 8051 board I was discussing a
little while ago:

<http://www.zws.com/products/polyceph/>

Previously, I mentioned the need of an evaulation board for CLCC-8
(Ceramic Leadless Chip Carrier) accelerometer. Unfortunately, CLCC-8
is too small. We are trying to build an improved resolution
accelerometer. One requirement is to boost the internal voltage to
18V, so we would need chip L & C. Our current plan is a DIP-32 multi-
chip module. I can't ask you for commitment, just my suggestion.

.