Re: How do I programmatically send signals to USB?
On Apr 30, 3:08 pm, unisonharmon...@xxxxxxxxx wrote:
Hello
How do I control voltages to pins of the USB programmatically?
For example, I'd like to say send a signal to individual USB pins (if
that's applicable in USB) how do I do that ?
Also what's the appropriate newsgroup for this question? Thanks .
Individual pins of what USB? A PC USB port? An embedded system? What
microcontroller?
.
Relevant Pages
- Re: W98se XP Home / Asus A7V8x-x / USB 2.0
... connector is on backwards or not. ... went through the same thing with a front set of USB ports. ... crossed the data+ pins. ... and all was lovely - drivers went ...
(microsoft.public.windowsxp.general) - Re: Quick recommendation on easy-to-interface data logging
... Each have USB to 24 i/o pins and FTDI drivers included each of these ... > The data can go in through the serial port, parallel port, or a USB connection, ...
(sci.electronics.design) - Re: Installing front USB cables? Help please - dont know which cables!!!
... after the USB I will, but for now it is fine to leave it. ... you'd still have to pull the return wires from the ... And the order of the pins ... unused cables hanging down :-) The connectors on the back of the ...
(alt.comp.hardware.pc-homebuilt) - Re: about Maxim MAX3421E
... I need a feedback about MAX3421E. ... My goal is to have the possibility to write on the USB some data that I'll ... Both devices have two voltage pins, ... The MAX3421E adds interrupt requests for the eight general-purpose ...
(comp.arch.embedded) - Re: Front USB connection to motherboard
... confused about the pins for the front USB connector. ... / vcc X X vcc \ ... wire anything, and can just plug into the back of the machine. ...
(alt.comp.hardware.pc-homebuilt) |
|
