Re: Development kit based on ARM9 core with 2.6 linux

On May 28, 10:25 pm, "Ulf Samuelsson" <u...@xxxxxxxxxxxxx> wrote:
"Ali" <abdulra...@xxxxxxxxx> skrev i meddelandetnews:1180404781.939222.62600@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx



On May 28, 3:37 pm, Brendan Gillatt
<bren...@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
On 28 May 2007 01:36:10 -0700, Ali <abdulra...@xxxxxxxxx> wrote:

I need to buy a development kit based on ARM9 core (I would love if i
can find with S3C2410A chipset ), i just need (10/100) Ethernet,
atleast 2 or more serial ports and USB. The application itself won't
need a huge amount of RAM or flash. And the most important thing would
be software part, yes, it should be with 2.6.x kernel and should be
providing complete tool chain from cross-platform tool chain to boot
loader and filesystem. Or atleast should be having good documentation
to get all those tools from relevant sources. And ofcourse good
customer support would be a big catch.

thanks,
ali

I haven't looked personally, but I would guess atmel should do you a
dev-kit; they are really pedaling their ARM cores.

AS for coming with a 2.6.x kernel - a vanilla kernel cross-compiled
with a compatible GCC will be fine.

I'm not too sure of the rest of the software side of things.
--
Brendan Gillattwww.brendangillatt.co.uk
GPG: 0x6E265E61

Probably yes, however their pricing is bit high and development board
comes with lots of extras that are simply not useful to me. I'm just
trying to find some simple board with fair price. And as far as 2.6 is
concern, i really doubt that there would be many products with that.
Through my little search for appropriate product i've come to believe
that 90% boards are still with 2.4 ;-) I might be wrong and maybe
someone here would point the right source!

If you shoot for an AT91RM9200 instead, then you will find
multiple boards with 2.6
www.mechatronicbrick.dkis but one.

If you focus on systems with dataflash, then you will
will have an easy route building your own kernel
using my "buildroot" at
ftp://at91dist:dist...@xxxxxxxxxxxxx/ -> AT91 third party -> linux host ->
source

Will build:
* cross compiler
* dataflashboot.bin
* u-boot
* linux-2.6.21.1
* root file system.

Should work with the mechatronic brick board.

If you do not care about ARM9, then you can buy the AVR32 Gateway for $69.
You have u-boot and linux support in mainstream.

--
Best Regards,
Ulf Samuelsson
This is intended to be my personal opinion which may,
or may not be shared by my employer Atmel Nordic AB

And thats very true, i wonder that in 2.6 we have numerous ports but i
can just find most products with atmel gadgets. Thanks for ftp site
and its really nice to find *everything* in single place.

ali

.

Relevant Pages

  • Re: Development kit based on ARM9 core with 2.6 linux
    ... providing complete tool chain from cross-platform tool chain to boot ... Or atleast should be having good documentation ... AS for coming with a 2.6.x kernel - a vanilla kernel cross-compiled ... You have u-boot and linux support in mainstream. ...
    (comp.arch.embedded)
  • Re: Development kit based on ARM9 core with 2.6 linux
    ... On May 28, 3:37 pm, Brendan Gillatt ... providing complete tool chain from cross-platform tool chain to boot ... Or atleast should be having good documentation ... AS for coming with a 2.6.x kernel - a vanilla kernel cross-compiled ...
    (comp.arch.embedded)
  • Re: Development kit based on ARM9 core with 2.6 linux
    ... providing complete tool chain from cross-platform tool chain to boot ... Or atleast should be having good documentation ... AS for coming with a 2.6.x kernel - a vanilla kernel cross-compiled ...
    (comp.arch.embedded)
  • Development kit based on ARM9 core with 2.6 linux
    ... can find with S3C2410A chipset), i just need Ethernet, ... providing complete tool chain from cross-platform tool chain to boot ... Or atleast should be having good documentation ...
    (comp.arch.embedded)