Re: CAN Nodes on the Network

From: Vladimir Vassilevsky <antispam_bogus@xxxxxxxxxxx>
Date: Thu, 28 Jun 2007 01:25:14 GMT

Achilles wrote:

1. Is it necessary for all CAN nodes on the network to have same
sampling point ???

The sampling point has to be set at reasonable value, however it doesn't have to be exactly the same for all nodes.

2. how can I verify that my ECU is running at the sampling point which
I had set during the hardware initialization?

????
Reading back the CAN configuration registers?
Or you are not sure that you figured out the correct values?

Vladimir Vassilevsky

DSP and Mixed Signal Design Consultant

http://www.abvolt.com
.

References:
- CAN Nodes on the Network
  - From: Achilles

Prev by Date: Re: Science/Engineering in the US, was: Re: Alternative to AVR
Next by Date: Re: LPC900/80C51 Compiler Toolchain
Previous by thread: Re: CAN Nodes on the Network
Next by thread: EDK Custom IP
Index(es):
- Date
- Thread