ADSP BF538_Board Bring Up Query

Hello to all,

I m working on ADSP BF538. Being the part of project i would like to
write the Board Bring Up(BBU) Software for the DSP Board. As this is
first time i m dealing with DSP and BBU as well, i a m looking for any
help frm all. Please guide me. If any one is working on the same DSP,
please let me know.Atleast tell me how to start the approach of
writing the BBU for the specified DSP.
Thanks in advance...........

With Best egards,
Nutty

.

Relevant Pages

  • Re: Pioneer VSX-D908S micro processor question.
    ... Had my own DSP ic fail in this way. ... long as the dsp board is plugged into the unit. ... all analog input functions work as long as you select the direct mode. ... Xin and Xout should have a continuous running clock signal on these two ...
    (sci.electronics.repair)
  • Re: Pioneer VSX-D908S micro processor question.
    ... Had my own DSP ic fail in this way. ... What doesn't work is if you plug in the dsp board, ... Xin and Xout should have a continuous running clock signal on these two ... I have had a number of these xtals fail in a variety ...
    (sci.electronics.repair)
  • Re: ADSP BF538_Board Bring Up Query
    ... I m working on ADSP BF538. ... write the Board Bring UpSoftware for the DSP Board. ... writing the BBU for the specified DSP. ...
    (comp.dsp)
  • ADSP BF538_Board Bring Up Query
    ... I m working on ADSP BF538. ... write the Board Bring UpSoftware for the DSP Board. ... writing the BBU for the specified DSP. ...
    (comp.dsp)
  • Re: Low cost starter kits? (audio)
    ... A good sound card can achieve a roundtrip latency of 6 ms, ... I want to do it on a DSP so that I can learn about DSPs and embedded ... better use of such a DSP board, ... less useful as a learning tool since Blackfin and SHARC are better ...
    (comp.dsp)