Re: debugging arm core using code composer studio

On Oct 2, 5:05 pm, "meenakshi" <meenaks...@xxxxxxxxx> wrote:
Hi,

I am new to code composer studio.I want to debug arm core(OMAP dual core
arch) using code composer studio.
is it possible to debug arm core of OMAP processor? how can i achieve it?
whether i need xds510 JTAG emulator ??
guide me properly..

I have used OMAP 5912 for a project. Initially it may look bit
difficult, but it is really very easy and reliable .
It is really a very good set of tools to work with .

I got the below info from the setting up of XDS510 for your reference-

1) Select the Code Composer Setup icon from the desktop.
2) From CC Setup you can either import a new configuration or select
from an existing one. From the filters pane select the platform
"xds510usb". This will give you a list of predefined configurations
for the XDS510USB emulator. If one of these configurations does not
exactly match your target then select the closet configuration. You
can then modify this configuration to meet your needs. Setup between
CCS 2.2x and 3.x has changed dramatically so see your CCStudio docs
for more details.
3) If you want to change the configuration of your setup simply right
mouse click on the configuration under System Configuration then
select Properties. You can modify the individual properties for your
setup. The I/O Port under Board Properties should be set to 0x510 for
the XDS510-USB emulator.
4) Save your configuration and exit CC Setup.

Running Code Composer
1) Connect the XDS560R target cable to your target system.
2) Apply power to your target system.
3) You can now start Code Composer by double-clicking on the
appropriate CCS icon. When CCS starts the XDS510-USB application
loader will download the emulation driver application. Once the
emulation application is loaded, the XDS510-USB emulator will
enumerate and CCS will start. If there is a problem during the load or
enumerate phase then the loader app will display an error/status
message.
If you are running CCS 3.1, once CCS has started select Debug->Connect
from the menu bar. Target Connect/Disconnect is a new feature in CCS
3.1, for more details go to your CCS online help.

Karthik Balaguru

.

Relevant Pages

  • Re: Link for Code Composer Studio problem
    ... I have TI Code Composer studio (CCS) ... described in the "Users guide - Link for Code Composer ... Link for Code Composer Studiodoes not support your ... It seems that I require CCS 3.3 and not 3.1 that I am using ...
    (comp.soft-sys.matlab)
  • Re: Link for Code Composer Studio problem
    ... I have TI Code Composer studio (CCS) ... described in the "Users guide - Link for Code Composer ... Link for Code Composer Studiodoes not support your ... Studio" is compatible with TI CCS IDE v3.1. ...
    (comp.soft-sys.matlab)
  • Link for Code Composer Studio problem
    ... I have Matlab R2007b version which has Link for Code ... I have TI Code Composer studio ... described in the "Users guide - Link for Code Composer ... It seems that I require CCS 3.3 and not 3.1 that I am using ...
    (comp.soft-sys.matlab)
  • Re: Serial Port Speed Problem (TMS320F2812)
    ... But with code composer 3.1 instead of ... the provided CCS. ... I am using a 30 Mhz clock, with a PLL setting of 10 like you said. ...
    (comp.dsp)