PC104 ISA bus.

Hi,

I have a PC104 from kontron (mops_lcd) that
I can't read IO ports from the ISA bus,
The write to ports is ok but the read gets
0xff always. (even with datalines forced '0' all the time)
Looks that IO input is comming from elsewhere
as onboard devices like LPT or COM work well
I suspect a bridge config or whatever...
Kontron support doesn't really help and I
wonder if anyone has stepped into this before...

Luis C.
.

Relevant Pages

  • Re: Problem with Serial Ports in Win CE 4.2
    ... I tried without Com16550 (just included the Kontron COM Ports) first, ... WinCE 4.2 and there the two COM Ports are working properly. ... Prev by Date: ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Odd Serial Port Problem
    ... so all the ports are on the ISA bus. ... the pc486 BSP automatically configures IRQ7 to a stray ... It looks like pc486 assumes IRQ9 is the second ATA port instead of IRQ15. ...
    (comp.os.vxworks)
  • Re: R: How to avoid serial port buffer overruns?
    ... FWIW here is the serial board we are using: ... The hardware guy says "The mn9845cv, have in default 2 serial ports and ... one ISA bus, where we have connected the tl16c554, quad serial port." ... fourport cards have their ports at 0x1a0..0x1bf ...
    (Linux-Kernel)
  • Odd Serial Port Problem
    ... BSP. ... so all the ports are on the ISA bus. ... I've checked the ports with the manufacturers diagnostics, and they appear to work properly. ...
    (comp.os.vxworks)
  • Re: ISR16550
    ... The EXAR QUART is on an ISA bus and each of the 4 ports has a unique IRQ - no interrupts are shared. ...
    (microsoft.public.windowsce.platbuilder)