QVGA display

I am pushing an bmp image generated by a embedded toolkit onto a QVGA
interfaced through a epson controller.
The image seems to be streched and when I took a magnifying glass and
noticed individual lines, I see that instead of drawing on one line
the pixel is drawn on two.

I do not have the pixel doubling feature enabled. I am using a 320 *
240 display. Below is my configuration of the epson controller.

SwivelView: Landscape
CLKI: 50.000 MHz
CLKI2: 6.500 MHz
BCLK: 50.000 MHz (=CLKI/1)
MCLK: 50.000 MHz (=BCLK/1)
PCLK: 6.500 MHz (=CLKI2/1)
Frame Rate: 73.5 Hz
Display Type: Single 320-bit Color TFT
FPShift: unchanged
Dithering: Enabled
Display Blank: Not Blanked
S/W Video Invert: Enabled
Pixel Doubling: None
PIP+ Window: (Start:0t 0t End:1t 0t): Disabled
Reg Linear Addr: 00420000h
Display Linear Addr: 00620000h
Display Memory Size: 00040000h (256k)

MainWin Parameters Pip Parameters
-----------------------------------------------------------
Resolution: 320 x 240 x 16 bpp 2 x 1 x 16 bpp
Virtual Width: 328 320
Bytes/Line: 656 640
Start Address: 00000 00000

Thx,
Suresh M. Shenoy
.

Relevant Pages

  • Cant run eboot.nb0.
    ... Friends I am working on smdk2440. ... I am trying to display a bmp image on the screen. ...
    (microsoft.public.windowsce.platbuilder)
  • Display a BMP image function
    ... a BMP image and display it on the screen with ugl. ... unsigned int _height; ... fseek(handle, 18, SEEK_SET); ... The problem is that the image isn't display correct. ...
    (comp.os.vxworks)
  • Re: createDIBsection failed
    ... "Francois" wrote in message ... > i'm using the following code which is supposed to display a BMP image on ... Regards, ...
    (microsoft.public.vc.mfc)
  • Re: createDIBsection failed
    ... "Francois" wrote in message ... > i'm using the following code which is supposed to display a BMP image on ... Regards, ...
    (microsoft.public.vc.language)