RMII support for Micrel KS8893

Hi,
I would like to know whether the Micrel KS8893 switch works fine in
RMII mode. Has anyone faced any issue using the RMII interface for this
switch?
Currently i am facing issues in receiving packets i.e i do not get a
response for any packet that i transmit. I also tried to do a Far End
loopback at the PHY but i fail to receive any packets from PHY.

Thanks
San


.

Relevant Pages

  • Re: Catalyst 4000 - Ciscos Response
    ... on a variety of factors such as Switch load and traffic patterns. ... Flooding packets ... database on the switch containing switch ports and the MAC addresses sourced ... Sniffer is on a different port than the workstation and servers. ...
    (Bugtraq)
  • Re: Company network slowdown
    ... if the 802.3 Ethernet packets were well formed and contained MAC ... I tired Ethereal, a Network General Sniffer, NT ... This was in the days when hubs were in fashion and switches ... >not go through a store and forward switch. ...
    (alt.internet.wireless)
  • Re: Duplicate Echo Replies with Channel Bonding
    ... In this mode both interfaces receive packets, ... >When both eth0 and eth1 are up and I ping from Host C to Host A I get ... >The destination network 192.168.120.0/24 exists on both Router A and ... Switch B does not have the MAC address in its MAC address table ...
    (RedHat)
  • Experts Help Please Settle Arguement - Hub or Switch if ISP offers several IPs
    ... you don't use a switch in this kind of arrangement. ... Switches break the network into segments but hubs broadcast to everyone ... Switches an algorithim for routing packets at Layer 2. ... When the switch realizes User A was the wrong destination, ...
    (alt.internet.wireless)
  • Re: Experts Help Please Settle Arguement - Hub or Switch if ISP offers several IPs
    ... you don't use a switch in this kind of arrangement. ... >Switches an algorithim for routing packets at Layer 2. ... >response is sent back to the hub from the right destination node. ... Note that I show an 8 port hub in the top drawing instead of a switch. ...
    (alt.internet.wireless)