Re: Shelf life of solder
In message <slrngu244l.38n.andrews@xxxxxxxxxxxxxxxx>, Andrew Smallshaw
<andrews@xxxxxxxxxxxxxxxx> writes
Looking around the net the answers seem contradictory. Some of
the more negative views are directly contradicted by my own
observations.
I've got a reel of solder that's been kicking around in my toolbox since
I was a television repair man, that's over 20 years ago and it still
makes good joints. It is good quality, think it's Ersin Multicore but
can't be sure as the label got shredded and lost over the years with
tools and miscellaneous junk bumping into it.
--
Clint Sharp
.
Relevant Pages
- Re: ordering with Mouser question
... so "ROHS compliant" parts have the leads tinned with a ... lead-free solder. ... T/R is "Tape and Reel." ... buying lots more stuff than a few dozen diodes for their pinball coils. ...
(rec.games.pinball) - Re: EM tech: more Fast Draw questions
... To add to what Scott says, with Gottlieb's of this eras decagon units, all of the wiring for scoring credits are soldered to posts that are held on to the boards by small rivets, then soldered. ... the rivets tend to get cracks in the solder and then the scoring of credits stop. ... having issues again, but sounds like you have an issue on either your 10,000 reel and/or 1,000 reel for the player that does not get the replay - the circuit board on that reel might need cleaning, and there is a little contact on the reel shaft that might need to be cleaned. ...
(rec.games.pinball) - Re: Movie Title Eyeballed
... There are a number of those kicking around in my head: ... reel". ... And infrared continues to look like the past tense of "infrare". ...
(alt.usage.english) - Re: Movie Title Eyeballed
... On 27 Oct 2008, R H Draney wrote ... There are a number of those kicking around in my head: ... reads it as "side- reel". ...
(alt.usage.english) - Re: fa 1950s dutch boy solder
... If there is 2.5 lbs of solder on that reel, ... WHY--- do I think that this is not electronic solder but, in fact, ...
(rec.audio.tubes) |
|
