The Steiner Tree Problem
- From: "Bob" <rk20049@xxxxxxxxx>
- Date: 30 Apr 2005 07:18:30 -0700
All,
Any one from this group can help me to solve this problem please!!!
Thanks
Bob.
The cost for a communication line between two stations is proportional
to the length of the line. The cost for conventional minimal spanning
trees of a set of stations can often be cut by introducing "phantom"
stations and then constructing a new Steiner tree. This device allows
costs to be cut by up to 13.4% (= 1- sqrt(3/4)). Moreover, a network
with n stations never requires more than n-2 points to construct the
cheapest Steiner tree. Two simple cases are shown in Figure 1.
For local networks, it often is necessary to use rectilinear or
"checker-board" distances, instead of straight Euclidean lines.
Distances in this metric are computed as shown in Figure 2.
Suppose you wish to design a minimum costs spanning tree for a local
network with 9 stations. Their rectangular coordinates are: a(0,15),
b(5,20), c(16,24), d(20,20), e(33,25), f(23,11), g(35,7), h(25,0)
i(10,3). You are restricted to using rectilinear lines. Moreover, all
"phantom" stations must be located at lattice points (i.e., the
coordinates must be integers). The cost for each line is its length.
Find a minimal cost tree for the network.
.
- Follow-Ups:
- Re: The Steiner Tree Problem
- From: Bart Demoen
- Re: The Steiner Tree Problem
- Prev by Date: Re: P=NP: Linear Programming Formulation of the TSP
- Next by Date: Re: The Steiner Tree Problem
- Previous by thread: AOA(AON) network representation
- Next by thread: Re: The Steiner Tree Problem
- Index(es):
Relevant Pages
|