Re: make error-> ld: Unrecognized argument: -Wl,+b...

On Feb 19, 2008 10:04 AM, Capacio, Paula J <PCAPACIO@xxxxxxxxx> wrote:

Hello,
I am getting the following error from make (excerpt only full list
follows)
Running Mkbootstrap for DBD::Oracle ()
chmod 644 Oracle.bs
rm -f blib/arch/auto/DBD/Oracle/Oracle.so
/usr/bin/ld
-Wl,+b"/usr/oracle/client/10.2/lib:/usr/oracle/client/10.2/r
dbms/lib" -b +vnocompatwarnings -L/usr/lib/hpux64 Oracle.o dbdimp.o
oci8.o -L
/usr/oracle/client/10.2/rdbms/lib/ -L/usr/oracle/client/10.2/lib/
-lclntsh `c
at /usr/oracle/client/10.2/lib/ldflags` -lm -lpthread -o
blib/arch/auto/DBD
/Oracle/Oracle.so \
\

ld: Unrecognized argument:
-Wl,+b/usr/oracle/client/10.2/lib:/usr/oracle/client/10.2/rdbms/lib
Fatal error.
*** Error exit code 1



Nasty - especially since you're not a C programmer.

Systems that build Perl using 'ld' directly as the way to build shared
objects give me the heebie-jeebies each time - and your Perl appears to have
been built that way. The '-Wl,+b...' notation is an instruction to the C
compiler to pass the '+b...' to the loader; the loader itself doesn't know
how to deal with -Wl options.

We can debate whether this is a bug in DBD::Oracle or not - or a bug in the
way Perl was built on your machine. Since Perl mainly works OK and
DBD::Oracle doesn't, I'd be more inclined to say DBD::Oracle is at fault,
but DBD::Informix (which I know a lot better than DBD::Oracle) faces roughly
similar issues and my recommendation is to build Perl so it uses the C
compiler to build shared objects rather than using 'ld' (or /usr/bin/ld)
directly.

Were you reporting the problem in relation to DBD::Informix, then I'd be
recommending building Perl with cc instead of ld as the 'loader'. OTOH, I
think DBD::Informix already copes with 'ld', but it raises a warning when
you run 'perl Makefile.PL'.

Not a definitive answer - but you can discuss with your C programmers.

If you are in dire straights, you can hack Makefile to exclude the '-Wl,'
prefix from the arguments.
That is not a satisfactory solution - you'd need to repeat the process every
time you need to rebuild the Makefile. And it may not be trivial to locate
where those definitions come from; it depends on the makefile (it may come
from the makefile material provided by Oracle, for example, and intercepting
that may be rather tricky).

Good luck -- I fear you are going to need it.

(Please continue the conversation in dbi-users and do not send to me
privately since I don't have anything much more to offer in the way of
help. Thanks. And thanks for including the 'perl -V' output and so on - it
helps. It's a pity some mailer along the line wrapped the lines horribly,
but that's probably not your fault.)




I have tried make clean followed by perl Makefile.PL -l and perl
Makefile.PL -nob; a similar error occurs but in the latter
/usr/lib/hpux64 is specified as the second directory instead of the
rdbms/lib. Any ideas what is wrong and how to resolve it?

I'm not a 'C' programmer, an Oracle admin, or an HP server admin; I'm
just a perl programmer trying to build DBD-Oracle 1.20 with Oracle 10.2
on an HP Itanium server running 64-bit perl 5.8.8. I have read the
README, README.hpux.txt, README.64bit.txt and README.help.txt. All help
will be GREATLY appreciated.

Below follows the full output of perl -V, compiler information, perl
Makefile.PL, and make. (watch out for line wrapping)
---perl -V---
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=hpux, osvers=11.22, archname=IA64.ARCHREV_0-thread-multi-LP64
uname='hp-ux bigsur03 b.11.22 u ia64 1800516905 unlimited-user
license '
config_args='-ders -Dcc=cc -Dusethreads -Duseithreads -Ud_sigsetjmp
-Uinstal
lusrbinperl -Ulocincpth= -Uloclibpth= -Duse64bitall -Dsh=/usr/bin/sh
-Dd_attribu
t=undef -Dd_attribute_warn_unused_result=undef -Dd_u32align=define
-Aprepend:lib
swanted=cl -Dvendorprefix=/opt/perl_64 -Doptimize=-fast +DSitanium2
+Ofltacc=st
rict -Accflags=+Z -Accflags=-DUSE_SITECUSTOMIZE -Duselargefiles
-Accflags=-DNO_H
ASH_SEED -Dprefix=/opt/perl_64 -Dinc_version_list=5.8.7/$archname 5.8.7
5.8.6/$a
rchname 5.8.6 5.8.4/$archname 5.8.4 5.8.3/$archname 5.8.3
5.8.2/$archname 5.8.2
5.8.1/$archname 5.8.1 5.8.0/$archname 5.8.0 -Dsed=/usr/bin/sed
-Duseshrplib -Dco
nfig_heavy=Config_dynamic.pl -Dcf_by=ActiveState
-Dcf_email=support@ActiveState.
com'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=de
fine
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags =' -D_POSIX_C_SOURCE=199506L -D_REENTRANT -Ae
-D_HPUX_SOURC
E -Wl,+vnocompatwarnings +DD64 +Z -DUSE_SITECUSTOMIZE -DNO_HASH_SEED
-D_LARGEFIL
E_SOURCE -D_FILE_OFFSET_BITS=64 ',
optimize='-fast +DSitanium2 +Ofltacc=strict',
cppflags='-D__STDC_EXT__ -D_HPUX_SOURCE -D_POSIX_C_SOURCE=199506L
-D_REENTRA
NT -D_HPUX_SOURCE -Wl,+vnocompatwarnings -DUSE_SITECUSTOMIZE
-DNO_HASH_SEED'
ccversion='B3910B A.05.55', gccversion='', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize
=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='/usr/bin/ld', ldflags =' -L/usr/lib/hpux64'
libpth=/usr/lib/hpux64 /lib /usr/lib /usr/ccs/lib /usr/local/lib
libs=-lcl -lnsl -lnm -ldl -ldld -lm -lsec -lpthread -lc
perllibs=-lcl -lnsl -lnm -ldl -ldld -lm -lsec -lpthread -lc
libc=/usr/lib/hpux64/libc.so, so=so, useshrplib=true,
libperl=libperl.so
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_hpux.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-B,deferred '
cccdlflags='+Z', lddlflags='-b +vnocompatwarnings -L/usr/lib/hpux64'


Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_PERLIO
USE_REENTRANT_API USE_SITECUSTOMIZE
Locally applied patches:
ActivePerl Build 817.1 [268662]
Iin_load_module moved for compatibility with build 806
POSIX: Support the long hostname version of uname()
Avoid signal flag SA_RESTART for older versions of HP-UX
PerlEx support in CGI::Carp
Less verbose ExtUtils::Install and Pod::Find
Patch for CAN-2005-0448 from Debian with modifications
Partly reverted 24733 to preserve binary compatibility
28671 Define PERL_NO_DEV_RANDOM on Windows
28376 Add error checks after execing PL_cshname or PL_sh_path
28305 Pod::Html should not convert "foo" into ``foo''
27736 Make perl_fini() run with Sun WorkShop compiler
27619 Bug in Term::ReadKey being triggered by a bug in
Term::ReadLine
27549 Move DynaLoader.o into libperl.so
27528 win32_pclose() error exit doesn't unlock mutex
27527 win32_async_check() can loop indefinitely
27515 ignore directories when searching @INC
27359 Fix -d:Foo=bar syntax
27210 Fix quote typo in c2ph
27203 Allow compiling swigged C++ code
27200 Make stat() on Windows handle trailing slashes correctly
27194 Get perl_fini() running on HP-UX again
27133 Initialise lastparen in the regexp structure
27034 Avoid "Prototype mismatch" warnings with autouse
26970 Make Passive mode the default for Net::FTP
26921 Avoid getprotobyname/number calls in IO::Socket::INET
26897,26903 Make common IPPROTO_* constants always available
26670 Make '-s' on the shebang line parse -foo=bar switches
26379 Fix alarm() for Windows 2003
26087 Storable 0.1 compatibility
25861 IO::File performace issue
25084 long groups entry could cause memory exhaustion
24699 ICMP_UNREACHABLE handling in Net::Ping
Built under hpux
Compiled at Sep 19 2006 13:50:51
@INC:
/opt/perl_64/lib/5.8.8/IA64.ARCHREV_0-thread-multi-LP64
/opt/perl_64/lib/5.8.8
/opt/perl_64/lib/site_perl/5.8.8/IA64.ARCHREV_0-thread-multi-LP64
/opt/perl_64/lib/site_perl/5.8.8
/opt/perl_64/lib/site_perl
/opt/perl_64/lib/vendor_perl/5.8.8/IA64.ARCHREV_0-thread-multi-LP64
/opt/perl_64/lib/vendor_perl/5.8.8
/opt/perl_64/lib/vendor_perl
.
-------------
---compiler info----
root@hxtapa12
[/usr/bin] # which cc
/usr/bin/cc
root@hxtapa12
[/usr/bin] # what /usr/bin/cc
/usr/bin/cc:
HP C/aC++ for Integrity Servers B3910B A.06.15 [May 16 2007]
-------------
---perl Makefile.PL---
[/tmp/perl_modules/DBD-Oracle-1.20] # perl Makefile.PL
Using DBI 1.51 (for perl 5.008008 on IA64.ARCHREV_0-thread-multi-LP64)
installed
in
/opt/perl_64/lib/site_perl/5.8.8/IA64.ARCHREV_0-thread-multi-LP64/auto/D
BI/
Configuring DBD::Oracle for perl 5.008008 on hpux
(IA64.ARCHREV_0-thread-multi-LP64)
Remember to actually *READ* the README file! Especially if you have any
problems.

Using Oracle in /usr/oracle/client/10.2
DEFINE _SQLPLUS_RELEASE = "1002000300" (CHAR)
Oracle version 10.2.0.3 (10.2)
Found /usr/oracle/client/10.2/rdbms/demo/demo_rdbms.mk
Using /usr/oracle/client/10.2/rdbms/demo/demo_rdbms.mk
Your LD_LIBRARY_PATH env var is set to '/usr/oracle/client/10.2/lib'
Reading /usr/oracle/client/10.2/rdbms/demo/demo_rdbms.mk
Reading /usr/oracle/client/10.2/rdbms/lib/env_rdbms.mk

Attempting to discover Oracle OCI build rules
cc -O -c DBD_ORA_OBJ.c
by executing: [make -f /usr/oracle/client/10.2/rdbms/demo/demo_rdbms.mk
build EC
HODO=echo ECHO=echo GENCLNTSH='echo genclntsh' CC=true OPTIMIZE=
CCFLAGS= EXE=DB
D_ORA_EXE OBJS=DBD_ORA_OBJ.o]
Oracle oci build command:
[ true -Wl,+s -Wl,+n +DD64 -o build
-L/usr/oracle/client/10.2/rdbm
s/lib/ -L/usr/oracle/client/10.2/lib/ -o DBD_ORA_EXE DBD_ORA_OBJ.o
-lclntsh `ca
t /usr/oracle/client/10.2/lib/ldflags` `cat
/usr/oracle/client/10.2/lib/syslib
list` -lm -lpthread]

WARNING: Stripped `cat /usr/oracle/client/10.2/lib/sysliblist`
from link command, because it contains libraries not
compiled with +z or +Z (PIC) causing link to fail.
Furthermore, we should have already grabbed these libraries
Found header files in /usr/oracle/client/10.2/rdbms/public.
WARNING: If you have trouble, see README.hpux.txt...
you may have to build your own perl, or go hunting for libraries
WARNING: If you have trouble, try perl Makefile.PL -l

Checking for functioning wait.ph


System: perl5.008008 hp-ux bigsur03 b.11.22 u ia64 1800516905
unlimited-user license
Compiler: cc -fast +DSitanium2 +Ofltacc=strict
-D_POSIX_C_SOURCE=199506L -D_R
EENTRANT -Ae -D_HPUX_SOURCE -Wl,+vnocompatwarnings +DD64 +Z
-DUSE_SITECUSTOMIZE
-DNO_HASH_SEED -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
Linker: /usr/bin/ld
Sysliblist: -l:librt.so -l:libnss_dns.so.1 -l:libdld.so -lm -lpthread
-lunwind -
lnsl
Oracle makefiles would have used these definitions but we override them:
CC: cc
CFLAGS: $(GFLAG) $(OPTIMIZE) $(CDEBUG) $(CCFLAGS) $(PFLAGS)\
$(SHARED_CFLAG) $(USRFLAGS)
[$(GFLAG) $(OPTIMIZE) $(CDEBUG) -Ae -z +Olibmerrno +Z -DHPUX
-DORAIA6
4 -DHPUX_IA64 +DD64 -DSS_64BIT_SERVER -DHPPA64 -DSLS8NATIVE -DSLU8NATIVE
+DD64 -
D_LARGEFILE64_SOURCE -D_REENTRANT -DHPUX_KTHREAD -DSLXMX_ENABLE
-DSLTS_ENABLE -D
_REENTRANT -I/usr/oracle/client/10.2/rdbms/demo
-I/usr/oracle/client/10.2/rdbms/
public -I/usr/oracle/client/10.2/plsql/public
-I/usr/oracle/client/10.2/network/
public -DHPUX -D_REENTRANT -DHPUX_KTHREAD -DSLXMX_ENABLE -DSLTS_ENABLE
-DSS_64BI
T_SERVER -DBIT64 -DMACHINE64 -DORAIA64 -DHPUX_IA64 $(LPFLAGS)
$(USRFLAGS)]
LDFLAGS: -Wl,+s -Wl,+n $(LDARCH_FLAGS) -o $@ -L$(PRODLIBHOME)
-L$(LIBHOME)
[-Wl,+s -Wl,+n +DD64 -o $@
-L/usr/oracle/client/10.2/rdbms/lib/ -L$(L
IBHOME)]
Linking with OTHERLDFLAGS = +DD64
-L/usr/oracle/client/10.2/rdbms/lib/ -L/usr
/oracle/client/10.2/lib/ -lclntsh `cat
/usr/oracle/client/10.2/lib/ldflags`
-lm -lpthread [from 'build' rule]

Checking if your kit is complete...
Looks good
LD_RUN_PATH=/usr/oracle/client/10.2/lib:/usr/oracle/client/10.2/rdbms/li
b
Using DBD::Oracle 1.20.
Using DBD::Oracle 1.20.
Using DBI 1.51 (for perl 5.008008 on IA64.ARCHREV_0-thread-multi-LP64)
installed
in
/opt/perl_64/lib/site_perl/5.8.8/IA64.ARCHREV_0-thread-multi-LP64/auto/D
BI/
Writing Makefile for DBD::Oracle

*** If you have problems...
read all the log printed above, and the README and README.help.txt
files.
(Of course, you have read README by now anyway, haven't you?)
-------------
---make output---
[/tmp/perl_modules/DBD-Oracle-1.20] # make
cp Oracle.pm blib/lib/DBD/Oracle.pm
cp mkta.pl blib/lib/DBD/mkta.pl
cp oraperl.ph blib/lib/oraperl.ph
cp dbdimp.h blib/arch/auto/DBD/Oracle/dbdimp.h
cp ocitrace.h blib/arch/auto/DBD/Oracle/ocitrace.h
cp Oraperl.pm blib/lib/Oraperl.pm
cp Oracle.h blib/arch/auto/DBD/Oracle/Oracle.h
cp mk.pm blib/arch/auto/DBD/Oracle/mk.pm
cp lib/DBD/Oracle/GetInfo.pm blib/lib/DBD/Oracle/GetInfo.pm
/usr/bin/perl -p -e "s/~DRIVER~/Oracle/g"
/opt/perl_64/lib/site_perl/5.8
.8/IA64.ARCHREV_0-thread-multi-LP64/auto/DBI/Driver.xst > Oracle.xsi
/usr/bin/perl /opt/perl_64/lib/5.8.8/ExtUtils/xsubpp -typemap
/opt/perl
_64/lib/5.8.8/ExtUtils/typemap -typemap typemap Oracle.xs > Oracle.xsc
&& mv Or
acle.xsc Oracle.c
cc -c -I/usr/oracle/client/10.2/rdbms/public
-I/usr/oracle/client/10.2/
rdbms/demo -I/usr/oracle/client/10.2/rdbms/public
-I/usr/oracle/client/10.2/plsq
l/public -I/usr/oracle/client/10.2/network/public
-I/opt/perl_64/lib/site_perl/5
.8.8/IA64.ARCHREV_0-thread-multi-LP64/auto/DBI
-D_POSIX_C_SOURCE=199506L -D_REE
NTRANT -Ae -D_HPUX_SOURCE -Wl,+vnocompatwarnings +DD64 +Z
-DUSE_SITECUSTOMIZE -D
NO_HASH_SEED -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -fast
+DSitanium2 +Oflta
cc=strict -DVERSION=\"1.20\" -DXS_VERSION=\"1.20\" +Z
"-I/opt/perl_64/lib/5.
8.8/IA64.ARCHREV_0-thread-multi-LP64/CORE" -DUTF8_SUPPORT
-DNEW_OCI_INIT -DORA_
OCI_VERSION=\"10.2.0.3\" Oracle.c
cc -c -I/usr/oracle/client/10.2/rdbms/public
-I/usr/oracle/client/10.2/
rdbms/demo -I/usr/oracle/client/10.2/rdbms/public
-I/usr/oracle/client/10.2/plsq
l/public -I/usr/oracle/client/10.2/network/public
-I/opt/perl_64/lib/site_perl/5
.8.8/IA64.ARCHREV_0-thread-multi-LP64/auto/DBI
-D_POSIX_C_SOURCE=199506L -D_REE
NTRANT -Ae -D_HPUX_SOURCE -Wl,+vnocompatwarnings +DD64 +Z
-DUSE_SITECUSTOMIZE -D
NO_HASH_SEED -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -fast
+DSitanium2 +Oflta
cc=strict -DVERSION=\"1.20\" -DXS_VERSION=\"1.20\" +Z
"-I/opt/perl_64/lib/5.
8.8/IA64.ARCHREV_0-thread-multi-LP64/CORE" -DUTF8_SUPPORT
-DNEW_OCI_INIT -DORA_
OCI_VERSION=\"10.2.0.3\" dbdimp.c
"dbdimp.c", line 82: warning #2236-D: controlling expression is constant
&& OCIErrorGet_log_stat(errhp, recno, (text*)NULL, &eg_errcode,
errbuf,
^

"dbdimp.c", line 281: warning #4275-D: constant out of range ([0 -
4294967295]
) for the operator
Newz(42, fb_ary->aindp, (unsigned)size, sb2);
^

"dbdimp.c", line 282: warning #4275-D: constant out of range ([0 -
4294967295]
) for the operator
Newz(42, fb_ary->arlen, (unsigned)size, ub2);
^

"dbdimp.c", line 283: warning #4275-D: constant out of range ([0 -
4294967295]
) for the operator
Newz(42, fb_ary->arcode, (unsigned)size, ub2);
^

cc -c -I/usr/oracle/client/10.2/rdbms/public
-I/usr/oracle/client/10.2/
rdbms/demo -I/usr/oracle/client/10.2/rdbms/public
-I/usr/oracle/client/10.2/plsq
l/public -I/usr/oracle/client/10.2/network/public
-I/opt/perl_64/lib/site_perl/5
.8.8/IA64.ARCHREV_0-thread-multi-LP64/auto/DBI
-D_POSIX_C_SOURCE=199506L -D_REE
NTRANT -Ae -D_HPUX_SOURCE -Wl,+vnocompatwarnings +DD64 +Z
-DUSE_SITECUSTOMIZE -D
NO_HASH_SEED -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -fast
+DSitanium2 +Oflta
cc=strict -DVERSION=\"1.20\" -DXS_VERSION=\"1.20\" +Z
"-I/opt/perl_64/lib/5.
8.8/IA64.ARCHREV_0-thread-multi-LP64/CORE" -DUTF8_SUPPORT
-DNEW_OCI_INIT -DORA_
OCI_VERSION=\"10.2.0.3\" oci8.c
"oci8.c", line 137: warning #2236-D: controlling expression is constant
&& OCIErrorGet_log_stat(errhp, recno, (text*)NULL, &eg_errcode,
errbuf,
^

"oci8.c", line 1330: warning #2167-D: argument of type "ub4 *" is
incompatible
with parameter of type "size_t *"

&str_len,
^

"oci8.c", line 1359: warning #2181-D: argument is incompatible with
corresponding format string conversion
sprintf(s_tz_hour," %03ld",tz_hour);
^

"oci8.c", line 1361: warning #2181-D: argument is incompatible with
corresponding format string conversion
sprintf(s_tz_hour," %02ld",tz_hour);
^

"oci8.c", line 1364: warning #2181-D: argument is incompatible with
corresponding format string conversion
sprintf(s_tz_min,":%02ld",tz_minute);
^

"oci8.c", line 1365: warning #4212-D: mismatch between character pointer
types
"text *" and "char *"
strcat(str_buf,s_tz_hour);
^

"oci8.c", line 1366: warning #4212-D: mismatch between character pointer
types
"text *" and "char *"
strcat(str_buf, s_tz_min);
^

"oci8.c", line 916: warning #4275-D: constant out of range ([0 -
4294967295])
for the operator
New(42, buffer, buflen, ub1);
^

"oci8.c", line 1821: warning #4275-D: constant out of range ([0 -
4294967295])
for the operator
Newz(1, obj->fields, (unsigned) obj->field_count,
fbh_obj_t);
^

"oci8.c", line 2021: warning #4275-D: constant out of range ([0 -
4294967295])
for the operator
Newz(42, imp_sth->fbh, num_fields, imp_fbh_t);
^

Running Mkbootstrap for DBD::Oracle ()
chmod 644 Oracle.bs
rm -f blib/arch/auto/DBD/Oracle/Oracle.so
/usr/bin/ld
-Wl,+b"/usr/oracle/client/10.2/lib:/usr/oracle/client/10.2/r
dbms/lib" -b +vnocompatwarnings -L/usr/lib/hpux64 Oracle.o dbdimp.o
oci8.o -L
/usr/oracle/client/10.2/rdbms/lib/ -L/usr/oracle/client/10.2/lib/
-lclntsh `c
at /usr/oracle/client/10.2/lib/ldflags` -lm -lpthread -o
blib/arch/auto/DBD
/Oracle/Oracle.so \
\

ld: Unrecognized argument:
-Wl,+b/usr/oracle/client/10.2/lib:/usr/oracle/client/10.2/rdbms/lib
Fatal error.
*** Error exit code 1

Stop.
-------------




--
Jonathan Leffler <jonathan.leffler@xxxxxxxxx> #include <disclaimer.h>
Guardian of DBD::Informix - v2007.0914 - http://dbi.perl.org
"Blessed are we who can laugh at ourselves, for we shall never cease to be
amused."

Relevant Pages

  • make error-> ld: Unrecognized argument: -Wl,+b...
    ... Running Mkbootstrap for DBD::Oracle ... I have tried make clean followed by perl Makefile.PL -l and perl ... I'm not a 'C' programmer, an Oracle admin, or an HP server admin; ... Below follows the full output of perl -V, compiler information, perl ...
    (perl.dbi.users)
  • Re: Fwd: DBD::Informix A configuration failure
    ... Perl doesn't think your compiler handles prototypes. ... Testing whether your Informix test environment will work... ... >> problems with the test program, you will need to revisit this ...
    (perl.dbi.users)
  • Re: ANNOUNCE: DBD:Oracle 1.18
    ... Well a warning in one compiler is better than and error in an other so I ... This might be a problem more with the older oracle OCI in your client. ... perl -Mblib t/26exe_array.t ...
    (perl.dbi.users)
  • Re: Fwd: DBD::Informix A configuration failure
    ... Your previous subject line was 'problem install DBD Informix'. ... > perl Makefile.PL ... > Configuring IBM Informix Database Driver for Perl Version 2003.04 ... Perl doesn't think your compiler handles prototypes. ...
    (perl.dbi.users)
  • Re: Compiler and an interpreter
    ... >>> error.Can anybody please tell me how the compiler and interpreter will ... Some small unit of the language is an acceptable input. ... > Perl does not to my knowledge in any way require the reading of the ...
    (comp.programming)