Re: (OT) ISO a serial (RS232) to USB converter
- From: Uwe Klein <uwe_klein_habertwedt@xxxxxxxxxxx>
- Date: Mon, 13 Nov 2006 18:20:49 +0100
Helmut Giese wrote:
Hello out there,pl 2203 is a generic chip that does usb 2 serial stuff which seems to
needing to access multiple RS232 lines at the same time we tried out
an USB to serial adapter (under XP). The requirements are not earth
shaking: Connect to a modem at 9600 Baud, 8N1, dial out and then
communicate with a device in the field.
The problem is: Communication does work at times but not always. It
could of course be a problem in my software, but since using COM1 and
COM2 works reliably, the thought occurred that the USB devices might
be at fault.
I replaced the device in question - only to find out that both seem to
come from the same vendor (Hardware Manager reports them both as
'Prolific USB to serial converter' - cited from memory, since I am
currently at a different location).
My question is: Did anyone have better experiences with an USB to
serial adapter from a different vendor?
Any hints or links will be greatly appreciated.
Best regards
Helmut Giese
be used by everyone and his/her grandma.
afair there was some bug report and an actual acknowledgement
by the vendor some time ago. ( but i am not quite sure if this was on c.l.t )
ha: http://groups.google.com/group/comp.lang.tcl/msg/4235f94ed04fbd79
uwe
.
- Follow-Ups:
- Re: (OT) ISO a serial (RS232) to USB converter
- From: Helmut Giese
- Re: (OT) ISO a serial (RS232) to USB converter
- References:
- (OT) ISO a serial (RS232) to USB converter
- From: Helmut Giese
- (OT) ISO a serial (RS232) to USB converter
- Prev by Date: Updating a starpack
- Next by Date: Re: How to scrollbar to existing window
- Previous by thread: (OT) ISO a serial (RS232) to USB converter
- Next by thread: Re: (OT) ISO a serial (RS232) to USB converter
- Index(es):
Relevant Pages
|